654648
6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
11
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice.
If replacement parts are needed, or if parts are missing or damaged, see HOW TO CONTACT CUSTOMER
CARE on the back cover of the owners manual.
Key No. Qty. Description Key No. Qty. Description
1 1 Tower
2 1 Access Cover
3 1 Right Support Leg
4 1 Left Support Leg
5 1 Right Arm
6 1 Left Arm
7 2 Counterweight
8 2 Swivel Arm
9 1 Right Arm Bracket
10 1 Left Arm Bracket
11 2 Adjustment Bracket
12 1 Left Cable Cover
13 10 Large Weight
14 9 Small Weight
15 1 Top Weight
16 1 Right Support Leg Cover
17 1 Left Support Leg Cover
18 1 Tower Cover
19 4 Floor Bumper
20 1 Handlebar
21 2 Weight Guide Rod
22 2 Weight Bumper
23 2 Top Weight Bumper
24 2 Small Weight Guide Bushing
25 4 Arm Bumper
26 2 Trunnion
27 4 3 1/2” Pulley
28 4 Hole Plug
29 8 4 1/2” Pulley
30 8 Cable Trap
31 4 Pivot Pulley Bearing
32 2 1” Washer
33 2 1” Wave Washer
34
1
W
eight Pin
35 16 3/8” x 1/2” Screw
36 4 3/8” x 4 1/2” Socket Head Screw
37 2 3/8” x 2 1/4” Bolt
38 4 3/8” x 2” Bolt
39 4 Roll Pin
40 4 5/16” x 5/8” Socket Head Screw
41 8 1/2” x 1” Bolt
42 4 3/4” x 1/2” Shoulder Bolt
43 1 Cable
44 2 Rubber Cover
45 8 1/4-20-unc Set Screw
46 2 Aluminum Coupler
47 8 3/8” Jamnut
48 2 Cable Bearing
49 2 Eyebolt
50 2 1 1/8” Retainer Ring
51 4 5/8” Nut
52 4 5/8” Lock Washer
53 4 3/8” Serrated Lock Washer
54 8 3/8” Nut
55 2 Adjustment Knob
56 2 Spring
57 2 Adjustment Pin
58 16 Rivet
59 4 1/4” Nut
60 2 Handle
61 2 Double Cable Trap
62 2 1” Retainer Ring
63 1 Right Cable Cover
64 1 Grip
65 1 Large Weight Guide Bushing
66 8 1/2” x 1” Bolt
67 2 Spring Clip
68 4 3/8” x 1 1/2” Bolt
69 4 3/4” Pivot Bushing
70 10 3/8” x 3/4” Socket Head Screw
71 1 Tower Top Plate
72 2 3/8” x 1 3/4” Bolt
73 1 Ankle Strap
74
2
Bungee Clip
75 2 #10 x 1/2” Screw
76 2 Bungee Cord
77 4 Bungee Tie
78 2 5/16” Washer
# 1 Owner’s Manual
PART LIST—Model No. GZFM6006.4 R0205A
CABLE DIAGRAM
This section explains how to adjust the strength machine. Make sure all parts are properly tightened each time
the strength machine is used. Replace any worn parts immediately. The strength machine can be cleaned with a
d
amp cloth and a mild, non-abrasive detergent. Do not use solvents.
6
ADJUSTING THE RESISTANCE
To change the amount of resistance for your workout,
insert the weight pin into the desired weight. Make
sure that the weight pin is fully inserted into the
weight stack.
ADJUSTING THE
ARMS
To change the position of an arm, pull the adjustment
knob out and move the arm to the desired position.
Reengage the knob into the adjustment bracket.
ADJUSTMENTS
Weight
Stack
Weight
Pin
The cable diagram at the right shows the proper route
of the cable. Use the diagram to make sure that the
cable and the cable guards have been assembled
correctly. If the cable has not been correctly routed,
the strength machine will not function properly and
damage may occur
. The numbers show the correct
route of the cable.
Make sure that the cable guards
do not touch or bind the cable.
1
2
3
4
5
6
8
9
10
7
Arm
Adjustment
Knob
Adjustment
Bracket
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Icon Freemotion Cable Cross - GZFM6006.4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Icon Freemotion Cable Cross - GZFM6006.4

Icon Freemotion Cable Cross - GZFM6006.4 Bedienungsanleitung - Französisch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info