633384
2
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
Network Troubleshooter
NaviTEK NT
The NaviTEK NT is a network tester for troubleshooting and maintenance
of active and passive copper and fibre networks. Incorporating an
improved graphical interface NaviTEK NT allows network technicians
to pinpoint and solve network connectivity issues faster than ever
before. Subsequently, tests can be saved as pdf reports and shared with
colleagues and clients using the free IDEAL AnyWare™ app.
Ethernet utilisation
Real time display of broadcast network
trac shown as a percentage of port
speed for the previous 60 minutes.
VLAN detection
& operation
Automatic detection of VLAN
ID’s allows the user to configure
NaviTEK NT for operation on a VLAN.
CDP/LLDP/EDP port
information
Show port information using Cisco
Discovery Protocol (CDP), Link Layer
Discovery Protocol (LLDP) and
Extreme Discovery Protocol (EDP).
Network Probe
View network illustration to verify test
results of each network component.
Netscan
Display list of IP and MAC addresses of
every device connected to the network.
Addressing the needs of today’s network technicians
Today, network technicians have a broad selection of software troubleshooting
tools at their disposal and whilst useful in certain situations and environments they
do have limitations. NaviTEK NT on the other hand oers a comprehensive suite of
test and troubleshooting functionality only found on dedicated hand-held testers:-
Copper and fibre test interfaces
Fast detection of link and IP information including duplex, speed, port ID,
VLAN, DNS, DHCP, Gateway status and IP address
Detects services such as ISDN, POTS and PoE
Accurate wire mapping including length measurement and distance to fault
Rugged, compact design permits use in confined spaces
Not susceptible to virus and malware attack
Press the Autotest button to
display summary information
and allow for detailed inspection
of network parameters.
Port & network
summary info
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ideal Networks NaviTEK NT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ideal Networks NaviTEK NT

Ideal Networks NaviTEK NT Bedienungsanleitung - Deutsch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info