Bedienungsanleitung Ideen Welt KL-G904 (Seite 2 von 2) (Englisch)

506732

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

- 2 - - 3 –

a-0,5 mb

ATTENTION! Read Carefully!

Before you install this luminaire, read this instruction manual carefully!

Introduction

Dear Valued Customer,

We thank you for the purchase of this quality product. This product is developed and constructed according

to the latest technical standards. The construction complies with the National and European Requirements

of the Low Voltage Directive and Electromagnetic Compatibility. The conformity was proven, relevant infor-

mation and documents are in the manufacturer’s possession..

In order to maintain conformity and ensure safe operation, strictly follow the operating instructions! They

contain important information regarding the operation and handling of this product. The provided information

should also be available to third parties in case you hand this luminaire to others. Therefore, please store

this manual safely.

Intended Use

• This product is exclusively approved for use with 230 V / 50Hz alternating voltage, and only in combination

with specified bulbs types (see the section entitled "Specifications").

• This product is non-dimmable.

• This product is permitted for indoor use only.

• The luminaire is suitable for mounting on normal flammable surfaces and therefore supplied

with the F-mark.

• Avoid moisture, dirt and excessive heat while installing and during operation.

• Use only the type of bulb as mentioned in the section "Technical Data".

• It is not permitted to change or rebuild the luminaire set.

• A different use than described above leads to damage of this product. Beyond that, it can create hazards,

such as short circuit, fire, electrical shock, etc.

• The safety instructions and technical data must be observed without fail!

Safety Reference

• Pay close attention to this manual’s safety warnings.

• Keep this manual close by to have it ready when needed.

• When passing the product to a third party, be sure to include the manual.

• Before connecting to the mains supply, ensure that the supply voltage and current comply with the

information on the rating plate.

• The luminaire complies to protection class II, and must not be connected to the protective conductor.

• Always ensure that the power supply is cut off before mounting the product, replacing bulbs, or any other

work on the luminaire.

• Wearing any metal or other conductive jewelery such as chains, bracelets and rings is forbidden during any

workings on the luminaire, including cleaning!

• The minimum allowable distance between the light source to any illuminated surface is 50 cm.

ATTENTION: Do not use this lamp as a bed lamp, and do not use this lamp flammable textile. Do not put

the supply cable across the head, because the bulb becomes very hot when switched on.

• Never cover the luminaire with heat-insulating materials.

• Do not attach any other products or decorations to the lamp.

• Do not insert any metallic objects into the lamp’s interior.

• Do not use the luminaire in rooms and adverse suroundings where flammable gases, vapors, or dusts exist

or might exist.

• Do not exceed the maximum wattage per bulb.

• To avoid fire and eye damage, please note the following:

- Never look into the light, and never direct aim the beam at persons or animals.

- Keep the luminaire away from flammable materials and objects!

In commercial facilities, the accident prevention regulations for electrical installations and equipment of the

commercial Accident Prevention & Insurance Association , must be strictly followed.

Cut the power supply completely and provide a safeguard to prevent reconnection in case of damages of any

kind, particularly in wet conditions when a safe operation is no longer ensured.

Only qualified persons may conduct repairs, original spare parts are required.

Mounting Assembly

Remove all packaging material.

Before installation, check the lamp for damage.

Only connect power once installation is complete.

The safety instructions and relevant technical data must be observed under all circumstances!

First plan the fixing position for the lamp, and ensure the availability of a 230 V outlet within 1.80 m distance.

ATTENTION: Please do not clamp this Lamp to tubular items, as they do not provide sufficient hold.

Proceed with the assembly according to the following steps:

• Remove the mounting ring from the lamp holder using the supplied tool.

• Put the lampshade on the lamp holder, replace the mounting ring, and screw them tight using the supplied

tool.

• Insert the supplied bulb into the socket.

• Clamp the luminaire to the mounting surface (clamp thickness 15 mm to 25 mm).

• Confirm the safe hold of the lamp.

• Adjust the desired light angle and direction while observing the minimum distance to any illuminated surface.

• Connect the Euro plug with the outlet and turn on the Switch. The lamp is ready for use.

Mounting Drawing

•

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ideen Welt KL-G904 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info