Bedienungsanleitung Ignis AKH 2012 IX (Seite 4 von 4) (Englisch)

806329

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website docs . whirlpool . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication

plate.

Model: xxxXXXXxx

XXX

XXXXXX XXXXXX XXXXX XXXXXXX

Meat

• Use any kind of oven tray or pyrex dish suited to the size of the

piece of meat being cooked. For roast joints, it is best to add some

stock to the bottom of the dish, basting the meat during cooking

for added avour. When the roast is ready, let it rest in the oven for

another 10-15 minutes, or wrap it in aluminium foil.

• When you want to grill meat, choose cuts with an even thickness

all over in order to achieve uniform cooking results. Very thick

pieces of meat require longer cooking times. To prevent the meat

from burning on the outside, lower the position of the wire shelf,

keeping the food farther away from the grill. Turn the meat two

thirds of the way through cooking.

To collect the cooking juices it is advisable to place a drip-tray with half

a litre of water directly under the grill on which the meat is placed. Top-

up when necessary.

Turnspit (only in some models)

Use this accessory to evenly roast large pieces of meat and poultry.

Place the meat on the turnspit rod, tying it with string if chicken, and

check that it is secure before inserting the rod in the seat located on

the front wall of the oven and resting it on the respective support. To

prevent smoke and to collect cooking juices, it is advisable to place a

drip-tray with half a litre of water on the rst level. The rod has a plastic

handle which must be removed before starting to cook, and used at

the end of cooking to avoid burns when taking the food out of the

oven.

Pizza

Lightly grease the trays to ensure the pizza has a crispy base. Scatter

the mozzarella over the pizza two thirds of the way through cooking.

CLEANING AND MAINTENANCE

Make sure that the oven has cooled down before carrying out any maintenance or cleaning. Do not use steam cleaners. Do not

use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could damage the surfaces of the appliance. Wear

protective gloves. The oven must be disconnected from the mains before carrying out any kind of maintenance work.

EXTERIOR SURFACES

Clean surfaces with a damp microbre cloth. If they are very dirty,

add a few drops of pH -neutral detergent. Finish o with a dry cloth.

Do not use corrosive or abrasive detergents. If any of these products

inadvertently comes into contact with the surfaces of the appliance,

clean immediately with a damp microbre cloth.

INTERIOR SURFACES

After every use, leave the oven to cool and then clean it, preferably

while it is still warm, to remove any deposits or stains caused by

food residues. To dry any condensation that has formed as a result

of cooking foods with a high water content, leave the oven to cool

completely and then wipe it with a cloth or sponge. Clean the glass in

the door with a suitable liquid detergent.

ACCESSORIES

Soak the accessories in a washing-up liquid solution after use, handling

them with oven gloves if they are still hot. Food residues can be

removed using a washing-up brush or a sponge.

LOWER THE TOP HEATING ELEMENT (Only in some models)

The top heating element of the grill can be lowered to clean the upper

panel of the oven. Remove the side accessory lateral shelves. Pull

the heating element out a little (1) and lower it (2). To reposition the

heating element, lift it up, pulling it slightly towards you, making sure it

comes to rest on the lateral support (3).

1 2 3

REMOVING AND REFITTING THE DOOR

To remove the door, open it fully and lift the catches, pushing them

forwards until they are in the unlock position (1). Close the door as

much as you can. Take a rm hold of the door with both hands – do not

hold it by the handle. Simply remove the door by continuing to close

it while pulling it upwards at the same time until it is released from its

seating (2). Put the door to one side, resting it on a soft surface.

~15°

Ret the door by moving it towards the oven, aligning the hooks of the

hinges with their seating and securing the upper part onto its seating.

Lower the door and then open it fully. Lower the catches into their

original position (3): Make sure that you lower them down completely.

Apply gentle pressure to check that the catches are in the correct

position.

Try closing the door and check to make sure that it lines up with the

control panel. If it does not, repeat the steps above: The door could

become damaged if it does not work properly.

REPLACING THE LAMP

Disconnect the oven from the power supply, unscrew the cover from

the light, replace the bulb and screw the cover back on the light.

Reconnect the oven to the power supply.

Please note: Only use 20-40 W/230 V type G9, T300 °C halogen bulbs.

The bulb used in the product is specifically designed for domestic

appliances and is not suitable for general room lighting within the home

(EC Regulation 244/2009). Light bulbs are available from our After-sales

Service. If using halogen bulbs, do not handle them with your bare hands

as your fingerprints could cause damage. Do not use the oven until the

light cover has been refitted.

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The oven is not working. Power cut.

Disconnection from the mains.

Check for the presence of mains electrical power and whether the

oven is connected to the electricity supply.

Turn o the oven and restart it to see if the fault persists.

Ignis AKH 2012 IX Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ignis AKH 2012 IX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info