Bedienungsanleitung Ignis AKS 309 (Seite 5 von 7) (Englisch)

806390

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

CONTROL PANEL

AOn/O

BCooking zone and timer selection

C-E Heat setting increase and decrease

DKey lock

DAILY USE

SWITCHING THE HOB ON/OFF

To switch the hob on, keep button “A“ pressed for approx. 2 seconds. The

4 cooking zone displays show “0“. If within 20 seconds none of the cooking

zones is activated, the hob switches o automatically as a safety precaution.

SWITCHING ON AND ADJUSTING COOKING ZONES

Press one of the buttons “B“ corresponding to the cooking zone you

intend to use. Select the heat setting required with buttons “E“ or “C“.

The other selectable cooking settings go from 1 to 9. Press buttons “+/−“

at the same time to cancel all settings.

IMPORTANT: the control is deactivated 10 seconds after the heat setting has

been selected.

To change the heat setting, rst press the selection button “B“ again, then

proceed to change the setting, using buttons “E“ or “C“.

TIMER

To set the Timer function, select the desired cooking zone and power

setting then press the cooking zone key again and a luminous dot

will appear on the display of the timer-controlled cooking zone. The

indication “00“ blinks on the 2 displays. Press buttons “C“ or “E“ to set

the time from 1 to 99.

IMPORTANT: after 10 seconds the timer displays will show the power

setting of the other cooking zones.

To view the remaining cooking time, press the timer-controlled cooking

zone key twice.

A FUNCTION

This function allows to automatically decrease the cooking zone power

level from the highest value (level 9) to the one selected by the user for

a later stage of cooking.

To activate this function rst press the “+“ button when level 9 is reached.

The display shows “A“ and “9“ ashes alternately with low brightness.

At this point, choose the desired power level (less than 9) with the “–“

button.

“A“ and selected level ash alternately with low brightness on the display.

The function is activated once “A“ and the selected level ash alternately

with high brightness on the display.

Once “A“ is no longer visible on the display (the “A“ function switches o

automatically after several minutes, depending on the set power level),

the cooking process continues with lower power and the display shows

only the selected power level.

N.B.: this function is not possible with level 9.

KEY LOCK

The Key lock function is switched on by holding down button “D“ until

a dot lights up above the function button. The control panel is locked

except for the switching-o function. The function remains on even after

the hob is switched o and on again and can be deactivated by pressing

button “D“ again until the dot above the function button goes o.

When the hob is o with the key lock activated to switch the hob on, rst

deactivate the key lock function by pressing button “D“ again until the

dot above the function button goes o.

The presence of water, liquid spilled from pots or any objects resting on

the controls can accidentally activate or deactivate the Key lock function.

RESIDUAL HEAT INDICATOR

When the cooking zone is switched o, the residual heat indicator “H“

remains on or ashes alternating with “0“ until the temperature of the

hob returns within safety levels.

IMPORTANT: The hob’s safety features include an automatic switching

o function. Prolonged use of the same heat setting triggers automatic

switch-o of the cooking zone (for example, after around 1 hour at

maximum heat setting, the cooking zone switches o).

IMPORTANT: To avoid a permanent damage the hob:

• do not use pots with bottoms that are not at;

• do not use metal pots with enamelled bottom;

• do not place hot pots/pans over the control panel.

FIRST TIME USE

Upon the rst installation, the control panel performs a functional test for

about 1 second, after which it automatically switches to the “Key lock“

function.

To deactivate the function, press and hold button “D“; an acoustic signal

will sound, and the corresponding led will turn o.

NOTE: If a reset occurs, repeat the procedure described above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ignis AKS 309 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ignis AKS 309

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info