Bedienungsanleitung Indesit G 84 V (Seite 6 von 52) (Deutsch, Englisch, Holländisch, Französisch)

513179

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

How to use your dryer

1. Plug in, switch

on electricity.

2. Sort your laundry

(see section “Sorting

Your Laundry”)

3. Open the door

by pressing and

releasing the front

panel in the position

shown.

4. Always check

the following:

5. Load the dryer

placing the

clothes carefully in

the drum pushing

them well towards

the back and

away from the

door seal. Close

the door.

6. Press the Power

Switch ‘IN’.

7. Select the

required programme

or drying time. (see

section “The

Controls”)

8. Press the START

switch to commence

the drying

programme.

9. When finished

open the door and

take out the

laundry. Clean and

replace the fluff

filter.

10.Switch off

electricity and

remove plug from

socket.

WARNING: WHEN

SWITCHING ON

OR OFF, PLEASE

ENSURE THAT

YOUR HANDS

ARE DRY

WARNING: WHEN

SWITCHING ON

OR OFF, PLEASE

ENSURE THAT

YOUR HANDS

ARE DRY

FLUFF FILTER

is clean and in place

Removing Items

By opening the door you can check the dryness of the load as often

as you wish and if you want, remove some items before they are

fully dry. (This is particularly useful for a mixed load where you want

to iron some items, but others are to be fully dried.) You will need

to press the start button after closing the door to re-start the

programme. See section ‘The Controls’.

The Controls

Programme ControlStart Switch

Power Switch Active Light

To set the programme, all you have to do is turn the Programme

Control knob until the required selection appears in line with the

indicator.

Automatic programmes (for load sizes more than 1kg)

1. Dry Cottons ( HIGH heat) This gives driest results.

Some bulky items or large load of towels

may appear slightly damp after this

programme and require a short period of

timed drying.

2. Damp Cottons ( HIGH heat)

3. Iron Dry Cottons ( HIGH heat)

This gives the wettest results.

4. Dry Synthetics ( LOW heat)

5. Damp Synthetics ( LOW heat)

6. Iron Dry Synthetics ( LOW heat)

Timed programmes (for load sizes less than 1kg)

7. 40 minutes ( LOW heat) include cool tumble followed by the

Crease Care phase.

8. 30 minutes ( LOW heat) include cool tumble followed by the

Crease Care phase.

9. 20 minutes ( LOW heat) include cool tumble followed by the

Crease Care phase.

10. Airing, 20 minutes of cool tumble.

11. Easy Iron Programme, see section"Easy Iron Programme".

For description of other programmes see next page.

Press and release the START button to commence a drying

programme (The drying programme must have been selected first).

The Active Light will then glow.

Press the button IN to turn the dryer on.

The dryer will not operate unless the power button is IN.

Setting the

Programme

Options

Starting the Dryer

Power Switch

NOTE: If the door is opened during a programme, the Dryer will

automatically stop. To continue the programme, after closing the

door, the START button must be pressed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Indesit G 84 V Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info