Babies, young children or individuals who cannot express
their consent are not suitable to take blood pressure
measurement.
Individuals with serious arteriosclerosis are not suitable to
take blood pressure measurement.
Blood pressure readings may change in case of pregnancy.
Pregnant women can consult their doctor before taking
measurement.
Self-measurement is not medical treatment. If there are
unusual values, please consult your doctor.
Handling batteries properly:
- As soon as old batteries run out, replace with new
batteries.
- Do not use old and new batteries together.
- Align the polarities of batteries correctly.
- When the unit will not be used for more than 3 months,
remove the batteries. Otherwise, batteries may leak and
cause damage to the unit.
SYS.
mmHg
DIA.
mmHg
Pulse
/min
MemoryMemory
M
5. When the measurement is complete,
the cuff will automatically deflate and
your systolic and diastolic pressure
values and pulse rate will display.
Avoid smoking, eating or exercising for 30 minutes before
taking measurement
1. Sit upright in a chair with your both
feet on the floor.
2. Roll up the sleeve to bare your wrist
if necessary. Take caution not to
constrict the blood flow.
3. Pull on the end of the cuff until it wraps
securely around your wrist. Place your
elbow on a table so that the monitor will be at the same
level as your heart.
4. Press the “ ” button. The cuff will automatically inflate and
the measurement will start.
After measurement, the last set of measured values will be
saved automatically after measurement when the unit is
turned off by pressing Power button or by automatic power
off after 3 minutes.
9
MEMORY FUNCTIONS
User can delete all the past readings stored in memory by
replacing the batteries.
4.2 Delete Past Readings
4.1 View Past Readings
1. Press the “Memory” button to enter memory function.
2. Press the “Memory” button to display the next sets of
values. Past readings are displayed from the most recent
to the oldest.
3. This can stored up to 99 sets of past readings.
Package Content Instruction Manual, Battery Set,
Warranty Card
Model No. DW 500
Measurement Method Oscillometric
Measurement Range Pressure: 20 – 280 mmHg
Pulse Rate: 40 – 195 beats/min
Accuracy Pressure: +/- 3 mmHg
Pulse Rate: +/- 5%
Inflation Pump driven
Pressure Detection Semi-conductor
Power Supply 2 x AAA batteries
Auto Power Off 3 minutes after last operation
Storage Environment -20°C to 60°C, 10% to 95% RH
Operation Environment 10°C to 40°C, 30% to 85% RH
External Dimensions 3.15” (L) x 2.95” (W) x 2.36” (H) or
80 x 75 x 60 mm
Net Weight 126 g (batteries excluded)
Cuff Dimensions For wrist circumference of
13.5-19.5 cm
TROUBLE SHOOTING
Note: If your problem cannot be solved by the above,
consult your store of purchase. Do not disassemble
the unit.
SPECIFICATIONS
101112
STORAGE & MAINTENANCE
Note: Subject to modification without prior notice.
Remove batteries from the unit when it will not be used for
more than 3 months.
Use a dry, soft cloth to clean the unit, or if desired, use a cloth
lightly dampened with water.
Keep away the unit from direct sunlight, extreme
temperatures, humidity or moisture.
Do not use alcohol, benzene, thinner or other volatile liquids
to clean the unit.
Do not wash or expose the arm cuff to liquid.
No display when
you press the
Power/Start button
Have the batteries
run out?
Replace new
batteries.
Are the battery
polarities wrong?
Re-align batteries
in correct polarities.
“Err P” displayed
Check if the cuff is
properly connected.
Replace the air tube
if it is broken.
“Err 1” displayedDeflate too rapidly
Return for servicing.
“Err 2” displayed
Movement during
measurement
Do not move during
measurement
Signal interference
Remove interfering
source e.g. mobile
phones, magnets.
“Err 3” displayedIncorrect resultsMeasure again.
Fail to inflate
SolutionProblemCause
QUICK START GUIDE
Memory
Low Battery
Indicator
Pulse symbol
Systolic
Diastolic
Pulse
Memory No.
(1~99 readings)
Note:
- Avoid smoking, eating or exercising for 30 minutes before
taking measurement.
- Do not move or talk during measurement.
- Measurement can be taken on either arm.
1. Relax
2. Sit upright in a chair with your both feet on the floor.
3. Remove tight fitting clothing from you upper arm and
thick clothing. Do not roll up your sleeve if it is too tight.
4. Place your arm on a table so that the cuff will be at the
same level as your heart.
2. Pull on the end of the cuff until it
wraps securely around your wrist.
Do not over tighten the cuff.Allow
1 cm or ½ inch between the bottom
of the cuff and the crease of your
wrist.
1. Squeeze slightly and pull to
remove the battery cover.
2. Insert 2 AAA batteries with
the polarities in correct
direction.
3. Replace the battery cover.
Press it lightly until the lock
securely clicks into place.
678
BATTERY INSTALLATION
3 TAKING MEASUREMENT
3.1 Sitting Correctly
3.2 Applying the Wrist Cuff
1. Place your elbow on a table and palm facing upward, and
wrap the cuff around the left wrist.
3.3 Taking Measurement
Besides Systolic and Diastolic
values, Pulse will also be displayed
after a measurement.
3.4 Heartbeat Reading
M
pulse
3. Remove the arm cuff and take note of your measurement
results.
2. When the measurement is complete, the cuff will
automatically deflate and your systolic and diastolic
pressure values and pulse rate will display.
1. Press the “ ” button. The cuff will automatically inflate
and the measurement will start.
Note：You can press the “ ” button to stop measurement
at any time.
Note: Replace batteries when the battery indicator “ ”
shows low voltage.
5
3. Make sure the cuff is at the same level as your heart.
Manufactured in accordance with International Standards
Manufacturer： Truly Instrument Ltd - Hong Kong
EC-Representative：Hong Kong Truly Semiconductor Ltd.
1-2 Alpha Buildings, The Buntings Kestrel Drive,
Stowmarket Suffolk, IP14 5GZ, UK
Main Unit
2xAAA
Alkaline Battery
SYS.
mmHg
DIA.
mmHg
Pulse
/min
MemoryMemory
M
SIZE:72*97MM 正面
SIZE:72*97MM 反面
0123
Importer: INOVAXION
10 rue Jean Cottin 75018 - Paris - France
Ref : INOTP04
Find our products on
www.inocare.fr
Brauchen Sie Hilfe? Stellen Sie Ihre Frage.
Missbrauch melden von Frage und/oder Antwort
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Inocare DW500 - INOTP04 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
