Bedienungsanleitung Inovalley SM121 (Seite 2 von 4) (Englisch)

552860

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

SET ALARM

DOWN

SNOOZE

CHANNEL

Click

Alarm

On/Off

12hr/24hr

switchable

°C/°F

switchable

Enter into

snooze state

Switchable

between CH1,

2 and 3

Standard

mode

Hold

Enter into

clock

setting

Enter into

alarm setting

Clear current

registere CH

Click

Confirm

the setting

One step

forward

One step

backward

SET

Hold

steps/second

8 steps/second

backward

Click

Confirm the

setting

One step

forward

One step

backward

ALARM

Hold

steps/second

forward

8 steps/second

backward

Click

One step

forward

One step

backward

Choose the

channel

ALARM

temperature

Hold

steps/second

forward

8 steps/second

backward

3.2 Normal states

A) Hold “SET” for 2 seconds to enter into time setting

B) Click “ALARM” to switch the alarm on/off

C) Hold “ALARM” for 2 seconds to enter into Alarm setting

D) Press “DOWN” to switch between °C/°F

E) When ALARM rings, click “SNOOZE” to enter into the snooze state every 5 minutes

F) Press “CHANNEL” to switch RF channel, CH1 CH2CH3

G) Hold “CHANNEL” key for 2 seconds to clear out all data of current “CHANNEL”

3.3 Manual time set

1. Hold “SET” key for 2 seconds to enter into time setting

2. The sequence of time setting: Year(2000-2099) Month Date  Language  Hour  Minute  Time zone Exit

3. The figures will flash during the setting.

4. Press “SET” to confirm the setting, and enter the next setting state

5. Press “UP” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will run forward by 8

steps/second.

6. Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

7. Moon phase is changed accordingly

8. The system will exit automatically if no key is operated in 8 seconds.

3.4 Alarm set

A) Hold “ALARM” key for 2 second to enter into alarm setting

B) The sequence of alarm setting: Hour  Minute  exit

C) The figures will flash during the setting.

D) Press “ALARM” to confirm the setting, and enter the next setting state

E) Press “UP” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by

8 steps/seconds.

F) Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

G) The system will exit automatically if no key is operated in 8 seconds.

4/ FUNCTION AND EFFECT

4.1 The receiving function of RF

A) After installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes.

B) Under normal display mode, hold the “CHANNEL” key for 2 seconds to clear out the channel information

C) If there is no effective signal with same ID code received for the current channel in 35 minutes, the temperature of

that CH will shows “--.-“.

D) The temperature display will resume back when the correct signal is received again

FONCTION

OPERATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Inovalley SM121 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info