Bedienungsanleitung Intex 28406 PureSpa SSP-H-20-1 (Seite 5 von 21) (Englisch)

686587

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

254

S AVE THESE INSTRUCTIONS

(254IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 01/28/2016

English

CAUTION

• Maintain water chemistry in accordance with manufacturer’s instructions.

• This product is provided with a RCD located at the end of the power cord. The RCD must be

tested before each use. Do not use the spa if the RCD does not function properly. Disconnect

the power cord until the fault has been identiﬁ ed and corrected. Contact a qualiﬁ ed electrician to

correct the fault. Do not bypass the RCD. There are no serviceable parts inside the RCD.

Opening the RCD will void the warranty.

1. Press the RESET button on the RCD.

2. Turn on the spa electrical equipment.

3. Press the TEST button on the RCD. The RCD indicator should turn

off and the electrical equipment should shut off. If the RCD indicator

does not turn off, and the electrical equipment does not shut off, the

RCD is faulty. Do not use the spa. Contact a qualiﬁ ed electrician to

correct the fault.

4. Press the RESET button on the RCD. The indicator on the RCD

should turn on. If the RCD indicator does not turn on, the RCD is

faulty. Do not use the spa. Contact a qualiﬁ ed electrician

immediately to correct the fault.

WARNING

TEST

RESET

TEST

RESET

TEST

Page 5

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter

plugs to connect unit to electrical supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Do not leave the spa empty for extended period of time. Do not expose the spa under direct

sunshine.

• When the appliance is not in use for long period of time, such as in the winter, the spa set should be

disassembled and stored indoor.

• Adequate drainage system must be provided around the spa to deal with overﬂ ow water.

• Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.

• Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex

service center for further direction.

• Never use the spa alone or allow others to use the spa alone.

• Never pour water with a temperature higher than 40°C (104°F) into the spa directly.

• Keep all pets away from spa to avoid any damage.

• Do not add bath oil or bath salt to the spa water.

• The spa must be setup on a level, ﬂ at and smooth surface that is capable of supporting the

maximum load of the ﬁ lled spa with four adult occupants: weight 1136Kg (2500 lbs); six

adults: 1592 kg (3500 lbs).

• Provide adequate drainage system around the spa to deal with overﬂ ow water and splashes.

WARNING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex 28406 PureSpa SSP-H-20-1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex 28406 PureSpa SSP-H-20-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info