Bedienungsanleitung Intex 28409 Pure Spa Plus (Seite 4 von 22) (Englisch)

686128

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

254

S AVE THESE INSTRUCTIONS

(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018

English

Page 4

j) Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness. The use of alcohol, drugs, or

medication can greatly increase the risk of fatal hyperthermia. The causes, symptoms, and effects of hyperthermia may be described as

follows:

Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of

98.6°F (37°C). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness,

and fainting. The effects of hyperthermia include failure to perceive heat; failure to recognize the need to exit spa or hot tub; unawareness

of impending hazard; fetal damage in pregnant women; physical inability to exit the spa or hot tub; and unconsciousness resulting in the

danger of drowning.

• People with infectious diseases should not use a spa or hot tub.

• To avoid injury exercise care when entering or existing the spa or hot tub.

• Always add chemicals to water, never add water to chemicals. Adding water to chemicals may cause strong fumes or violent reactions and

hazardous chemical spray.

• Never jump or dive into a spa or any shallow body of water.

• Assembly and disassembly by adults only.

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any adjustment to the product.

• The plug must be accessible after product is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by a qualiﬁ ed electrician in order to avoid a hazard. Use only identical replacement parts

when servicing.

• To reduce the risk of electric shock and ﬁ re, do not use extension cords, timers, plug adaptors or converter plugs to connect unit to

electrical supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Do not leave the spa empty for extended period of time. Do not expose the spa to direct sunlight for extended period of time.

• Provide adequate drainage system around the spa to deal with overﬂ ow water and splashes.

• Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.

• Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex service center for further direction.

• Never pour water with a temperature higher than 104°F (40°C) into the spa directly.

• Keep all pets away from spa to avoid any damage.

• Do not add bath oil or bath salt to the spa water.

• Avoid drowning risk. Keep children away. Children or objects cannot be seen under cover.

• Remove cover completely before entry of bathers – entrapment possible.

• Stay off cover – will not support weight.

• Non-secured or improperly secured covers are a hazard.

• Follow these rules to avoid drowning, or other serious injury.

WARNING

CAUTION

• Maintain water chemistry in accordance with manufacturer’s instructions.

• This product is provided with a GFCI/RCD located at the end of the power cord. The GFCI/RCD must be

tested before each use. Do not use the spa if the GFCI/RCD does not function properly. Disconnect the

power cord until the fault has been identiﬁ ed and corrected. Contact a qualiﬁ ed electrician to correct the

fault. Do not bypass the GFCI/RCD. There are no serviceable parts inside the GFCI/RCD. Opening the

GFCI/RCD will void the warranty.

Plug the power cord into a grounded electrical socket.

Press the

RESET

button on the GFCI/RCD.

Turn on the spa electrical equipment.

Press the

TEST

button on the GFCI/RCD. The GFCI/RCD indicator

should turn off and the electrical equipment should shut off. If the

GFCI/RCD indicator does not turn off, and the electrical equipment

does not shut off, the GFCI/RCD is faulty. Do not use the spa.

Contact a qualiﬁ ed electrician to correct the fault.

Press the

RESET

button on the GFCI/RCD. The indicator on

the GFCI/RCD should turn on. If the GFCI/RCD indicator does

not turn on, the GFCI/RCD is faulty. Do not use the spa.

Contact a qualiﬁ ed electrician immediately to correct the fault.

WARNING

TEST

RESET

TEST

RESET

TEST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Intex 28409 Pure Spa Plus Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Intex 28409 Pure Spa Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info