611568
119
Zoom out
Zoom in
Vorherige Seite
1/139
Nächste Seite
Upgrading Your Device
Software Updates
The Software Updates page identifies the Iomega EZ software status and provides the ability to
update the software for the Iomega EZ .
This software is protected by RSA BSAFE technology.
Auto-update process: installing a device software update
1. In the table listing the current software installed on your Iomega EZ , click in the Action
column to check for updates.
2. The Status column will state whether the software is up to date or if an update is available.
To copy an update file to your Iomega EZ , click . The software update file is
downloaded directly to your Iomega EZ .
3. If multiple updates are ready, you may install all the updates at the same time. Click
Apply all pending updates to install the available updates. The software updates are
applied to your Iomega EZ .
4. Once the software is installed, the Iomega EZ will reboot. If you are applying multiple updates,
you only need to reboot once. Do not power down the Iomega EZ during this time.
5. If you want to remove the update without applying changes, click in the Action column.
Caution: Do not shut down the Iomega EZ during the update process as this can damage the
Iomega EZ . The Iomega EZ will be temporarily inaccessible during the software update. Be
sure no critical files are being accessed.
Manual update process: installing a device software update
1. In the table listing the current software installed on your Iomega EZ , click in the Action
column to check for updates.
2. If an update is available, the Status column will state that a software update is available with a
link. Download the update file to your local computer.
3. To retrieve the update, click
Add Software.
4. In the Add Software pop-up window, if an update is available, there will be a link to download
the appropriate update for your Iomega EZ . Click the link, follow the instructions on the
download site page, and download the software update to your local computer.
5. Once downloaded, click Browse to select the update, and then click Upload to continue.
When the update is uploaded to the Iomega EZ , the Status column will say Ready to apply.
109
119

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Iomega EZ Media and Backup Center wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info