Bedienungsanleitung Ion Air LP System (Seite 3 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

617152

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

5. Raise / Lower Lever – Raises and

lowers the tonearm.

6. 33 / 45 / 78 Switch – This switch

controls the RPM of the turntable

platter.

Note: For best results when playing 78 RPM

vinyl records, use a 78 stylus (sold separately).

Only use a 78 stylus with 78 RPM vinyl records.

Purchase the iCT06rs 78 stylus at

ionaudio.com/ict06rs.

7. Autostop switch – This switch turns autostop

on or off. When autostop is on, the platter will

start spinning when the tonearm is placed over

the record and stop spinning when the record

has reached the end. (When autostop is off, the

platter will always spin regardless of the

position of the tonearm.)

Note: If your vinyl record stops before it

reaches the end of the music, turn Autostop to

the off position for this particular record. This is generally recommended for 45 RPM

records.

8. Headphone Jack – Connect headphones (sold separately) to listen to your vinyl

playback.

9. Bluetooth Button – Press this button to start Bluetooth pairing. If after 5 minutes no

Bluetooth speaker can be found to pair with, the Bluetooth transmitter will become

inactive, and the LED will turn off. If currently connected, press this to disconnect from a

currently connected Bluetooth device.

10. Bluetooth LED – This LED blinks when pairing with a Bluetooth device. Once fully paired,

the LED will remain solid. The LED will be off when Bluetooth is inactive, and when the Air

LP is turned off.

11. Volume – Adjust this to control the headphone level.

12. RCA Output* – The audio from a playing vinyl record is sent to this line-level RCA audio

output. This must not be connected to phono level devices.

13. USB Audio Output – Use the included USB cable to connect your turntable to your

computer. The USB connection will send audio from the turntable to your computer.

Please see the Using Air LP With Your Computer section of this manual for information.

14. Power Cable Input – Use the included adapter to connect to wall power.

15. Power Button – Press this button to turn Air LP on/off. Air LP Turntable will re-connect to

your last used Bluetooth Speaker when powering on, if it is in range.

16. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8”

stereo auxiliary input. The audio from the Aux Input is also transmitted over a Bluetooth

connection.

IMPORTANT: Remove the plastic

cartridge cover (needle cover) before

operating the turntable.

*WARNING: The RCA outputs are LINE

level. Please only connect these to LINE

level inputs. You may damage your

receiver if you plug in a LINE level device

into a PHONO level input.

IMPORTANT: Place the included felt

slipmat on the platter; then place your

record on the felt slipmat to carefully hold

your records.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion Air LP System Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info