Bedienungsanleitung Ion ALESIS DM6 (Seite 4 von 12) (Deutsch, Englisch, Italienisch, Spanisch)

519159

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

MIDI / USB

The DM6 module has its own internal sounds, but you can also use it as a trigger-to-MIDI interface with drum

module software by connecting its USB port to that of a computer. In this case, triggering the pads and

pedals of the kit will send MIDI messages to your computer, so you can trigger drum sounds from your

software's sound library. You will need to select the proper MIDI output format to use the DM6 module this

way (see below).

MIDI OUTPUT FORMATS

The DM6 module can send MIDI information in two different formats: the internal format (default) or the GM

format. (Note: If you record a performance using one format, it will only be playable on other devices that

support that format.)

The internal format is used for the module to function as a sound source. "Program

change" and "Note on/off" messages will be transmitted in this mode. This is the default

mode

The GM format is used when the module is connected to a computer. In this format,

you can use DM6 as a trigger-to-MIDI interface, triggering sounds from your favorite

drum module software. Only "Note on/off" messages will be transmitted in this mode.

(Also, the metronome and music that accompanies Patterns will not be sent, since it is

not MIDI information.)

To select the MIDI output format:

1. Press PATTERN to enter Pattern Select Mode.

2. Press VALUE +/- to select "P–N" (internal format, the default setting) or "––N" (GM format).

KITS

SELECTING A KIT

The DM6 module comes with 10 Preset Kits (001 –

010) and 5 User Kits (011 – 015). To select a kit:

1. Press KIT to enter Kit Select Mode. The LCD

will display the current Kit number and the Kit

Indicator will light up.

2. Use VALUE +/- to select a Kit.

3. To adjust the Kit's volume (which is different

from the module's master volume level), press

VOLUME to enter Volume Adjustment Mode.

The Volume Indicator will light up and the LCD

will display the Kit's current volume. Use

VALUE +/- to adjust it.

When you are finished, press KIT to re-enter Kit

Selection Mode or press another button.

SELECTING TRIGGER VOICES

There are 108 built-in Voices that you can assign to

each trigger. To select a voice:

1. Press VOICE to enter Voice Select Mode. The

LCD will display the current Voice number and

the Voice Indicator will light up.

2. Use VALUE +/- to select a Voice.

3. To adjust a trigger's volume (which is different

from the Master or Kit volume levels), press

VOLUME to enter Volume Adjustment Mode.

The Volume Indicator will light up and the LCD

will display the trigger's current volume. Use

VALUE +/- to adjust it.

When you are finished, press VOICE to re-enter Voice Selection Mode or press another button.

When the module is recordin

-armed, the LCD will display

the current kit's volume, but you will not be able to adjust it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion ALESIS DM6 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info