Bedienungsanleitung Ion BLOCK ROCKER RF (Seite 4 von 20) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

498503

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

DIAGRAM AND PARTS DESCRIPTION

1. Instrument / Microphone

Input with Volume Control

(1/4"): This mono input

accepts a 1/4" input such as a

microphone, guitar, or other

musical instrument.

2. iPod/Auxuliary input with

Volume Control (Stereo

RCA): This knob controls the

level of the iPod and the RCA

input. This stereo RCA input

can be used to connect a CD,

MP3, or other audio source.

To connect to a portable device

with a 1/8" headphone jack,

you need a standard (1/8" to

RCA) adapter which is NOT

included.

3. Master Volume Control: This

knob controls the master volume of the BLOCK ROCKER.

4. Power Adapter (IEC): Insert the included power cable here to charge the unit. Note that the BLOCK ROCKER

can run off the power adapter while it simultaneously charges the battery. The charge indicator illuminates

when the battery is charging.

5. Voltage Selector*: Set this to the correct voltage for

your location standard.

6. Power ON/OFF Switch: Turns BLOCK ROCKER on or

off. Please note that while BLOCK ROCKER is

connected to a power source, it does not need to be

powered on to charge the battery.

7. Link Output: This 1/4" jack is a stereo line level output

that can be connected to the stereo input of an amplifier or amplified loudspeaker such as another BLOCK

ROCKER.

8. Battery Level Indicator: While the unit is powered ON, these four lights indicate the power left in the battery.

Battery life varies based on volume and usage.

9. iPod Charging Switch: Turn on iPod charging by setting this switch to the "Charge iPod" position.

IMPORTANT NOTES

Use this troubleshooting guide if: The sound is distorted at high volumes.

• Input is clipping: Try lowering the input gain or the volume control on your sound source or music instrument.

• Output is clipping: Lower the main volume level.

• There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level.

This will allow you to play the music louder before clipping (distortion) occurs.

• The link cable: is being plugged into the instrument or MIC input instead of the RCA line input.

Important: With all large speakers, an initial "break-in" period is needed to perform at optimal levels. To

properly "break-in" your BLOCK ROCKER, play an audio source at medium volume for a few hours.

SPECIFICATIONS

Input Voltage: AC 100-120V/ 60Hz 220-240V/ 50Hz

Input Wattage: 50W

Output Wattage: (RMS) 18W, 1%THD, (Peak) 22W

Frequency Response (±3dB): (Aux) 90Hz-20kHz, (iPod) 77Hz-20kHz

Bottom pole mount specifications: Standard Pole Mount found at professional audio retailer:

Depth 80mm (3.15")

Diameter 35.5mm (1.40")

Time required to fully charge the BLOCK ROCKER: under 4 hours

Battery life: Over 12 hours* at full volume of the BLOCK ROCKER when fully charged.

*Note: Battery life may vary based on temperature, age, and volume usage of product.

* WARNING: U.S. users should set this

switch to "100-120V" whereas U.K. and most

European users should set this to "220-

240V." Selecting the improper voltage can

damage the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion BLOCK ROCKER RF Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info