Bedienungsanleitung Ion PARTY ROCKER LIVE (Seite 4 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch, Finnisch)

617133

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

4. Master Volume Control: This adjusts the speaker’s

main mix volume, which includes Microphone Input,

Auxiliary Input, and the audio of a paired Bluetooth

device.

5. Power LED: Indicates whether Party Rocker Live is

on or off.

6. Light Mode: There are three modes to select from for

how the dome lights react to the music.

• Auto = the dome lights spin and change color

with a predetermined pattern regardless of the

beat of the music playing.

• Beat Sync = the dome lights spin and change

color to the beat of the music playing.

• App Mode = the dome lights are controlled using

the mobile app (available for Android or iOS).

7. Dome: The dome light can spin and react to the music

playing (depending on the Light Mode that is selected).

8. Power Cable Input (IEC): Insert the included power

cable here to power the unit.

9. Power ON/OFF Switch: Turns Party Rocker Live on or off.

10. Air Vents: These air intake and air outtake vents operate when Light Mode is turned on to ensure the light

dome operates efficiently.

Note: Please ensure these vents do not get covered or blocked.

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source or musical instrument. Also, try to

reduce the overall volume of Party Rocker Live.

If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This

will allow you to play the music louder before clipping (distortion) occurs.

If there is a high-pitched whistling noise when using microphones: This is probably feedback. Point the

microphone away from the speaker.

If you can’t hear the microphone over the music volume: Turn down the music volume from your source.

Connecting with a Bluetooth Device

1. Turn on your Bluetooth device.

2. Power on Party Rocker Live and it will automatically go into pairing mode to search for Bluetooth devices. You

will know you are in pairing mode when the LED is off.

3. If your Bluetooth device is not able to pair to the amp, press the disconnect button on the amp to break

previous Bluetooth connections and reset the Bluetooth module.

4. Navigate to your Bluetooth device’s setup screen, find “Party Rocker Live” and connect.

Note: If your Bluetooth device prompts for a pairing code, enter ‘0000’.

5. Paired LED will light up solid when it is 'paired'.

Note: If you experience trouble pairing or playing music, update your device's OS.

6. To disconnect pairing, press the ‘Disconnect’ button on Party Rocker Live.

7. To connect to another Bluetooth device, repeat steps 3-4.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

WARNING: Do not look directly into the dome

light. Do not sit, stand, or apply pressure on

the dome light.

1010

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion PARTY ROCKER LIVE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info