Bedienungsanleitung Ion PLANTER SPEAKER (Seite 5 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

519233

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

CONNECTING A BLUETOOTH DEVICE

1. Turn on Planter Speaker by firmly pressing the power

button once, located on the bottom of the pot.

2. Press and hold the Connecting button for 5 seconds until

the blue Connecting LED blinks.

3. Navigate to your Bluetooth device’s setup screen, find

“Ion Planter spk” and connect.

4. If your Bluetooth device is not able to connect to Planter Speaker, press the Connecting button on Planter

Speaker to break previous Bluetooth connections and reset the Bluetooth module.

Note: Maximum range will be achieved when using devices with Bluetooth 4.0.

5. To connect a new device, press and hold the Connecting button for 5 seconds. Repeat Step 3.

6. To disconnect a connected Bluetooth device, press the Connecting button on Planter Speaker.

Note: If you experience trouble connecting or playing music, update your device's OS.

LISTENING TO MUSIC FROM THE AUX/LINKING

CONNECTOR

1. Turn on Planter Speaker by firmly pressing the power button once, located on the bottom of the pot.

2. Connect a 3.5mm TRS cable* from the music source to Planter Speaker’s Aux/Linking Connector.

3. Press and hold the Vol + button for 3-5 seconds to switch the Aux/Linking Connector function as an input.

4. To listen to the signal from a connected Bluetooth device

instead of the signal from the Aux/Linking Connector,

press the Connecting button for 5 seconds or remove the audio cable which will disengage the Aux/Linking

Connector and switch back to Bluetooth Connecting.

SPEAKER LINKING

By default, the Aux/Linking Connector functions as an output. To connect two Planter Speakers together for extended

output, the Planter Speaker that is not connected to your Bluetooth device will need its Aux/Linking Connector to

function as an input. To do this, connect a 3.5mm TRS cable* between the two Planter Speaker Aux/Linking

Connectors (see the CONNECTION DIAGRAM section). Press and hold the Vol + button for 3-5 seconds on the

Planter Speaker that is not connected to your Bluetooth device.

SETUP GUIDE

Setup Example #1: Sound for a fixed listening area

In this example you can use a single Planter Speaker for

listening in a fixed area, such as on a deck with a table and

chairs directly facing the speaker.

Setup Example #2: Extended range of sound for a patio

with multiple listening areas

In this example, we have multiple listening areas: a barbecue

setting with two tables and chairs. Since the listening will be

spread across multiple locations, use a pair of Planter

Speakers to get spacious sound, filling a wide area.

*For details on how to purchase a 3.5mm TRS cable, visit www.ionaudio.com/products/details/planterspeaker

WARNING: Keep any non-water-resistant

devices (phones, music players, etc.) in a dry

place where they will not be affected by water

and cause a risk of electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ion PLANTER SPEAKER Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info