Bedienungsanleitung Irox HBR425i (Seite 20 von 21) (Deutsch, Englisch, Französisch, Italienisch)

578936

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

71 72

7069

6. BELL / ALARM

6a) HOW TO SET AND ARM THE ALARM

To set an alarm,

1. Press [ALARM] once to display alarm time. If the alarm

is disarmed, the time will be displayed as “ OFF ”.

2. Hold [ALARM] for two seconds. The hour digits will

blink.

3. Enter the hour using [ ] or [ ].

4. Press [ALARM]. The minute digits will blink.

5. Enter the minutes using [ ] or [ ].

6. Press [ALARM] to exit.

7. Repeat the same procedure to set single alarm.

The alarm “ ” “ ” and “ Pre-AL” icons will be

displayed indicating which alarm is armed. You can also

arm or disarm an alarm by pressing the [ ] or [ ]

button at alarm display mode. Press [MODE] to return to

clock display mode.

During the setting, press and hold [ ] or [ ] will

increase or decrease the value rapidly.

For display language, you can choose among English (En),

German (DE), French (Fr), Italian (IT) and Spanish (SP) -

in that order. If there is an item you do not wish to change,

simply press [ MODE ] to bypass the item.

When you finished the change, press [ MODE ] to exit.

The display will return to the clock mode.

5e) DISABLE THE RECEPTION OF

THE RADIO CONTROLLED CLOCK

If you are using this product outside the central European

timezone, you may disable the reception of the radio

controlled clock, Press min. 3 Seconds the key [ ] to

disable the automatic time signal reception. The reception

signal [ ] will then disappear from the display.

To re-enable the time signal reception, press again for

min. 3 Seconds the [ ] key.

5b) HOW TO SET THE ZONE TIME

To set the zone time,

1. Press [MODE] until at zone time display mode,

2. Hold [MODE] for two seconds, the zone time offset

will be displayed.

3. Enter the offset using [ ] or [ ].

4. Press [MODE] to exit.

5c) CALENDAR CLOCK DISPLAY MODES

The clock and the calendar share the same section of the

display. The calendar is displayed in a day-month format.

Each press on the [MODE] button will change the display

between clock with second, clock with day of week, zone

time with day of week.zone time with second and

day-month.

5d) HOW TO SET THE CLOCK MANUALLY

To set the clock manually, hold [MODE] for two seconds

it will show the display language. Use [ ] or [ ] to

change it. Press [ MODE ] to confirm. Repeat the same

procedure to set ˚C/˚F, year, month, date, date-month

format, 12/24, hour and minute.

5. RADIO CONTROLLED CLOCK

5a) HOW TO SET THE RADIO

CONTROLLED CLOCK

1. After the batteries are installed. The clock will

automatically search the radio signal. It takes about 3-5

minutes to finish this process.

2. If user wishs to disable the auto-reception feature, hold

the [ ] button for 2 seconds to disable it.

3. To enable the auto-reception feature again, holds the

“Up” for 2 seconds again to force it receive and allow it

receive at desired time.

4. If the radio signal is received, the date & time will be set

automatically with radio control signal icon [ ] turns on.

5. If the clock fails to receive the time signal, it will be show

as [ ] icon. Then user can set the time manually.

W S

6e) ALARM FEATURE

* Weekday Alarm

The alarm sound will be activated and the icon will be

flashed on weekday when it is armed and the alarm time

is reach.

* Single Alarm

The alarm sound will be activated and the icon will be

flashed once when it is armed and the alarm time is

reach. Once it finished, it will be disabled automatically.

* Pre-Alarm

The pre-alarm sound will be activated and the icon

will be flashed if outdoor temperature under or equal

two degree C. Which is programmable 15, 30, 45, 60

or 90 minutes earlier than the weekday alarm or single

alarm time.

7. SPECIFICATIONS

Temperature Measurement

Main unit

Indoor Temperature measurement

Proposed operating range : 0°C to +50.0°C

32.0°F to 122.0°F

Humidity Measuring range : R.H. 10% to 95%

at 25˚C ( 77˚F )

Temperature resolution : 0.1°C

0.2°F

Humidity resolution : 1% R.H.

Remote unit

Proposed operating range : -20°C to + 60°C

-4 °F to 140 °F

Temperature resolution : 0.1°C

0.2°F

RF Transmission Frequency : 433 MHz

Maximum No. of Remote unit : 3

RF Transmission Range : Maximum 30

meters

(open area)

Temperature sensing cycle : around 43~47

seconds

6c) SNOOZE FEATURE

When the alarm sound is on, press the snooze key enter

snooze mode. After 8 minutes, alarm sound will be wake

up automatically. The snooze cycle will be restarted if

you press the snooze key again.

If you leave the alarm sound on for 2 minutes, it will enter

snooze mode automatically with maximum 3 times.

6d) HOW TO STOP AN ALARM

Press [ALARM] on the unit to stop an alarm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Irox HBR425i Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info