569512
6
Zoom out
Zoom in
Vorherige Seite
1/65
Nächste Seite
Then place your transmitter in a dry location and route the outdoor sensor cable to a convenient
outside position.
Remarks:
The transmitter is for indoor use only and must not be placed outside.
The outdoor sensor cable should be routed outside through a window, door etc, ensuring that the
cable does not become trapped, as any damage to the cable is not covered by the manufacturer’s
warranty.
The outdoor sensor cable can be secured by the sticky pad provided or a screw (not provided).
The outdoor sensor cable must be positioned away from direct sunlight as this could result in an
inaccurate reading.
Remarks:
Keep in mind that your transmitter has a 30-meter open air transmission with no obstructions. Actual
transmission range will vary depending on what is in the path of the signal.
Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
Insert the holder into the bottom of the transmitter for desktop use or insert it into the back of the
transmitter for internal wall mount purpose
DCF SIGNAL RECEPTION AND SIGNAL INDICATOR
(The DCF77 signal is a radio time signal which operates across much of Central and Western Europe)
After your weather station is powered up, it starts to receive DCF signal. The icon flashes.
Weak or no DCF signal (only icon flashing)
Receiving strong DCF signal (
icon flashing)
Successful Reception ( icon becomes static)
Failed Reception (
icon disappear)
Remark: When your weather station is receiving radio controlled time signal, all buttons except the
snooze / light button will not function.
DCF TIME SIGNAL RECEPTION
Your weather station will automatically update itself to the exact time after receipt of the DCF time
code. The weather station will automatically attempt to receive the DCF signal every morning at 1:00
am, 2:00 am, 3:00 am, and 4: 00 am and onwards. If it receives the DCF signal at 3:00 am it will stop
receiving until 1: 00 am the next day.
To start DCF reception manually, press WAVE / – (°C/°F) button for 2 seconds. To stop DCF
reception, press and hold WAVE / – (°C/°F) for 2 seconds.
EN.5
Downloaded from www.vandenborre.be
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für It works SUNW2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info