Bedienungsanleitung Jablotron Azor GSM Mini (Seite 8 von 12) (Englisch)

554916

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

MLO51201 - 8 -

Motion detector installation



The detector should be installed in the corner (facing the room), 2 to 2.5m above the

floor. The detector is able to cover an area of up to 10 x 10m*.

 The detector holder should be fixed so that the sensor window points diagonally into the

room (the arrow in the holder should point upwards).

 Open the detector cover (by pressing the sides along the window).

 Connect the batteries (leave the internal switches in the 1 STANDARD and 2 DELAY

positions).

 Close the detector and push it on to the holder.

 Wait until the indicator light goes off (calibration is completed) and test whether the

detector reacts to human motion.

 Detected motion is indicated with flashing. You can test for 5 minutes and then the

indicator light goes off. You can repeat the test by opening and closing the detector

housing.

Tips and specifications

*) The detector must have an unrestricted view of the room. To avoid false alarms:

 the detector must not be located opposite radiators or other sources of heat with curtains

hanging above them.

 it should not be aimed at the windows.

 it must not be located near open windows, doors or ventilators (it can react to draughts).

 there must not be any things or animals with a temperature around 36°C (pets, rodents,

warm air from electric appliances, radiator grilles, etc.) in the guarded area.

- 17 - MLO51201

Settings

Azor’s properties can be set using a computer with MS Windows XP or higher.

Computer connection

You can use a USB cable to connect Azor to the computer. If the computer fails to open

the setting program automatically within a certain time after the connection has been

established, search for a USB disk named AZOR-USB and launch the A-Link file (click the

icon

) located on the disk. The ALink setting program is equipped with comprehensive

help for each feature.

The program options are divided into individual tabs where you can fill in individual setting

items, user names and telephone numbers, enrolling detectors using a code, and set GSM

control unit properties, etc.

Press the Save button to save the changes (in blue) in the tab into the Azor alarm.

When you press the Cancel button, the changes in the tab are not saved and previous

values are used.

Tips and specifications

 The first time Azor is connected, the computer needs extra time (up to several minutes) to

set up USB communication. Once the connection has been established, you will find a USB

disc named AZOR-USB in the computer. Further connections will be significantly faster.

 If Azor is connected to an ARC, access to the setup page can be blocked. In such a case

ask the ARC operators to help you change the settings.

 If you protect the settings with a code in the Settings window, Azor will require the code

every time a computer is connected to it.

Firmware update

You can transfer new version of Azor’s firmware (FW) into Azor using a computer. The file

containing the firmware can be downloaded from the manufacturer’s website. Open the file

using the options Control panel and Firmware upgrade in the A-Link menu. Wait until the

end of the installation procedure. All GSM control unit LED indicators should flash red for a

while during FW installation. When restarted after FW installation has finished, (switch it off

and on) Azor should behave according to the new firmware.

Tips and specifications

 Before you start installing a new firmware version read its description thoroughly and make

sure your product version is compatible with the new FW. It is recommended to make a

backup of the settings using the Export option.

 Both the backup battery and the mains adaptor must be connected to the GSM control unit

when the FW is being installed. There is a risk of irreversible damage if there is a power

supply failure while the FW update is in progress.

 When you have installed the new FW, check its settings on your computer (the A-Link

settings program can look different with different program versions). You should also test all

system functions properly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron Azor GSM Mini Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron Azor GSM Mini

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info