555038
10
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
6
An example of an SMS reply with a GSM position:
+44603012345 Region: South East England, District: Greater London, Name: Kingston-upon-
Thames. Distance approx 5.4 km. E14*52‘1“@ N48*50‘24“, + -500m 11:35:01, 03.12.08
3) Remote blocking of the car (IMO)
The car is “immobilized” by blocking the immobilization circuit every time the car alarm is set. However,
if the keys are stolen, the car can also be blocked remotely. If you send the “IMO” command to the car
alarm phone number, you will receive a confi rmation SMS. The immobilization circuit will be blocked im-
mediately if the ignition key is off. If the ignition key is on when the car alarm receives the command, the
circuit will be blocked as soon as the ignition is switched off. This will be confi rmed to you by an SMS
message. The unblocking of the car alarm will only be possible via the “UNIMO” SMS command.
Ask the installer whether the IMO circuit has been installed in the car and what it blocks.
Remote access and service www.gsmlink.cz
Both the user and the installer can use the www.gsmlink.cz website to register the car alarm and commu-
nicate with it remotely. The access is secure and protected with a password. The website allows inspec-
tion and control of the car alarm and the changing of phone numbers and texts. The CA-1803 version also
allows the display of the current car position on a map. It is also possible to obtain an extract from the event
memory listing including time information, source, event type and car movement history
1)
.
If you need to change any car alarm settings, you do not usually have to go to your service company.
You just have to make a phone call and the installer can perform remote setting.
More detailed information about the GSMLink application is available at www.jablotron.cz.
1)
only with CA-1803
10
T2711 - Jablotron - Manuál Atho10 10T2711 - Jablotron - Manuál Atho10 10 8.4.2009 13:27:128.4.2009 13:27:12
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jablotron CA-1803BT - reset 2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jablotron CA-1803BT - reset 2

Jablotron CA-1803BT - reset 2 Installationsanweisung - Englisch - 6 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info