Bedienungsanleitung Jablotron JA-60V (Seite 1 von 2) (Englisch)

554910

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

JA-60V Wireless outdoor PIR detector 1 MEB 52101

JA-60V Wireless outdoor P.I.R. motion detector

The JA-60V is an outdoor intruder detector designed to detect human

body movement in a protected area. Used PIR detector produced by Optex

has two double-layered detection patterns (upper and lower) both have to

be activated to trigger the alarm. This reduces false alarms, particularly

those caused by temperature changes, light reflection or small animals.

A tamper triggers an alarm if there is any attempt to tamper with the

detector.

The built-in transmitter is fully compatible with all JA-6X control panels.

Specifications

Power 3 V - 2 x AAA battery 1.5V

Battery life time about 1 year

Working frequency 433.92 MHz

RF Power

10 mV

Working range max. 100 m (open area)

Specification of the Optex VX 402R detector

Detection method Passive infrared

Coverage 12 m / 90° ; 14 segments

Mounting height 0.8 – 1.2 m

Detection speed 0.3 – 1.5 ms

-1

Battery saving timer 5 or 120 seconds

LED indicator only in the test mode

Environmental class IV (EN 50131-1)

Operating temperature -20°C to +50°C

Waterproof IP54

Humidity 95%

Dimension 198 x 80 x 108 mm

Security grade 2 (EN 50131-1)

Can be operated according to ERC/REC 70-03

Hereby, Jablotron Ltd., declares that this JA-60V is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Original of the conformity assessment can be found at the web page

www.jablotron.cz, section Technical support.

Contents of the set: detector JA-60V, pole mounting kit, screw kit, area

masking plates, 2 AAA batteries

Installation

Select the proper place for mounting the detector according to

following:

1. Install the detector perpendicular to the ground to make upper

detection area parallel to the ground

2. Installation height is 0.8 – 1.2 m

3. Mount the detector so that a majority of traffic flow is across the

detection pattern

4. Too much light such as strong sunlight directed exactly to the sensor

may cause unstable condition. It is highly recommended to avoid

such installation.

3.1.1. 3.

0.8

1.2 m

To open the detector:

1. Unscrew the lock screw and remove the top cover.

2. Unscrew the screws fastening the back box. Remove the back

box.

NOTE: never touch surface of the PIR sensor.

Fix the detector to desired place. Detector can be fixed directly on the

wall or by using supplied fix bracket on the pole (Ø 43 – 48 mm).

Optical Part

Cover

Lock Screw

Back Box

Pole Mounting

Bracket

Setting Switches

Enrollment of the detector to the receiver

The transmitter is placed below the optical part of the detector. Study

the installation manual of the receiver unit (control panel) first to learn how

enter the enrolling mode. When the receiver is switched to the enrolment

mode insert the two provided AAA batteries into the detector (polarity is

marked in the detector). The detector will generate an enrollment signal

after the batteries are installed.

INSTANT

DELAY

JA-60N transmitter

• Use DIP switch no. 1 to select the reaction of the system:

- instant (position ON)

- delay (position 1).

• Leave DIP switch no. 2 in position ON.

Adjustment

The upper detection area stays parallel to the ground. The lower area

moves as shown below depending on the position of the setting switch.

Detection length is therefore limited by the length of lower detection

area, since both upper and lower detection area have to be activated

at the same time to trigger the detector.

distance 0 - 12 m

distance 0 - 2 m

distance 0 - 5 m

distance 0 - 8 m

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron JA-60V Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info