Bedienungsanleitung Jablotron JA-80V (Seite 8 von 10) (Englisch)

555056

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

The JA-80V LAN/PSTN line communicator - 8 - MKA51202

Example: if gateway address is 192.168.33.1 enter:

933 192 168 033 001

Factory default setting: 192.168.001.001

5.22. DNS IP address

If DHCP is disabled (see 5.18) program the network DNS IP address

by:

934 xxx xxx xxx xxx

where:

xxx…x is the DNS address

Example: if the DNS address is 192.168.33.1 enter:

933 192 168 033 001

Factory default setting: 192.168.001.001

5.23. ARC phone numbers / IP addresses

Events can be reported to up to 2 ARCs (which can be independent or

ARC2 can work as ARC1’s backup). The communicator reports to

ARC1 via a LAN network using IP CID protocol and to ARC2 via the

phone line using CID protocol. This sequence serves to enter an

ARC’s main and backup IP addresses / phone numbers:

Main: 01 a xx....x ∗0

Backup: 02 a xx....x ∗0

where:

a 1=ARC1, 2=ARC2

xxx...x IP address and port for a=1 – entry format example:

01 2 ∗8 192 168 001 123 08080 ∗0

where ∗8 (auto-converts to #) signifies an IP address

which must have 12 digits and must be followed by the 5

digits of the port number (no separators)

tel. number (max. 20 digits) for a=2

To erase a tel. number / IP address enter: 01a∗0 or 02a∗0

If numbers / IP addresses are erased there will be no reporting to that

particular ARC

Notes:

• the communicator first tries to send data to the main number /

address, if it is not successful it tries the backup

• IP CID is a fast protocol and it also allows very frequent checking

of communication reliability with the ARC (e.g. every 5 minutes)

• Contact ID protocol can be used with ARCs linked by standard

telephone lines (if they support Contact ID)

• If your ARC does not allow IP CID protocols, please contact a

Jablotron distributor for details on how to update your ARC.

• Another way of backing up communication to an ARC is a calling

report to a particular number (see 5.3). This way up to 8 groups of

events can be reported to an ARC. For this the ARC needs 8 phone

lines which can recognize caller ID. By calling a particular ARC tel.

number the communicator is communicating what happened (the

kind of event). The ARC can recognize what happened by knowing

which telephone line is being rung.. By caller ID recognition it also

knows what installation is reporting. The ARC does not answer the

incoming calls on these telephone lines, so this simple kind of

communication is free of charge. By using this method the ARC does

not send any confirmation back to the communicator that the report

was successfully received.

Factory default setting: all tel. numbers / IP addresses erased

5.24. Installation (alarm system) ID for ARC use

The installation’s ID number which is sent to an ARC with every report

can be programmed by:

03 a zz..z ∗0

where:

a 1=ARC1, 2=ARC2

zz..z installation ID number, max. 8 characters (0 to 9 and

∗1=A to ∗6=F - hexadecimal number)

Factory default setting: 0000 for both ARCs

5.25. Selecting the ARC communication protocol

To select the required communication protocol enter:

04 a x

where:

a 1=ARC1, 2=ARC2

x 0=Contact ID, 1= IP CID

Notes:

• IP CID is the fastest of the above protocols and it also allows very

frequent checking of communication reliability with the ARC (e.g.

every 5 minutes)

• Contact ID protocol can be used with ARCs linked by standard

telephone lines (if they support Contact ID)

• If your ARC does not allow IP CID protocol, please contact a

Jablotron distributor for details on how to update your ARC.

Factory default setting: Contact ID for both ARCs

5.26. Selection of events to report to ARCs

The system recognizes 32 different types of events - see the following

table. This sequence allows you to select which events are reported to

which ARC.

05 a ec x

where a 1 = ARC1, 2 = ARC2

ec event code 01 to 32

x 0 = no report, 1 = report

Factory default setting: all events are reported

ec Event

01 Intruder alarm - instant

02 Intruder alarm - delayed

03 Fire alarm

04 Panic alarm

05 Number of permitted incorrect code-entries

exceeded

06 Alarm triggered during control panel power-up

07 Tamper alarm

08 End of tamper alarm

09 End of alarm indication

10 Alarm cancelled by user

11 Setting

12 Unsetting

13 Partial setting

14 Codeless setting

15 External communication fault

16 External communication restored

17 Fault

18 Fault no longer present

19 Mains dropout longer than 30 minutes

20 Mains dropout

21 Mains restored

22 Discharged battery

23 Battery OK

24 Switching to Service Mode

25 Leaving Service Mode

26 PGX ON/OFF

27 PGY ON/OFF

28 Radio communication jamming present

29 Internal communication fault

30 Internal communication restored

31 Communication test

32 Unconfirmed alarm

Besides the events listed above, the communicator also reports some

events which are not selectable here (e.g. the annual inspection

request if enabled in the control panel = CID 1393)

5.27. Defining the delay before data is resent to an ARC

The communicator tries to send reports to the main number / IP

address, and if unsuccessful it then tries the backup number. If still

unsuccessful, it then tries to re-send the data to both the ARCs again

as before, but after a period defined by:

06 a t

where: a 1 = ARC1, 2 = ARC2

t is the period: 0=immediately, 1 to 9 = 1 to 9 minutes

Factory default setting: 1 min. for both ARCs

Jablotron JA-80V Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Jablotron JA-80V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info