555058
12
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
JA-80Y user manual MFJ55800
12
restored
17 Fault
18 Fault no longer present
19 Mains dropout longer than 30
minutes
20 Mains dropout
21 Mains restored
22 Discharged battery
23 Battery OK
24 Switching to Service Mode
25 Leaving Service Mode
26 PGX ON/OFF
27 PGY ON/OFF
28 Radio communication jamming
present
29 Internal communication fault
30 Internal communication
restored
31 Communication test
32 Unconfirmed alarm
Table 2 Reports which can be sent and factory-default settings
18. SMS text editing xxxxTXT
The communicator contains various text strings which are used to create SMS reports of
events (containing premises name, event name, event source name) and also SMS
instruction text. You can modify the factory default values according to your needs by
sending SMS instructions.
SMS instructions are of the form:
xxxx_TXT_n,text,n,text
where: xxxx is a valid access code (user or master).
_ is a space character
TXT is the instruction to edit texts
n is the text number - see Table 3
text is the new text which will replace the former text. It is invalid to enter a
comma or a full stop inside the text string, but a space is valid within the
text string
Note: Changing SMS instruction texts (601 to 611) means renaming the instructions for
system remote control. For instance, when you change the value of text No. 603 from
STATUS to SYSTEM STATE you will only be able to interrogate the system status with
the new instruction. You can change texts according to your needs and also include a
password to protect against unauthorized use of SMS instructions.
Example: If 4321 is a valid access code then sending the SMS instruction:
4321 TXT 3,PIR corridor,340,code Charlie will change both the name of the detector
assigned to the third position and the name of the code assigned to position 40.
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Jablotron JA-80Y wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Jablotron JA-80Y

Jablotron JA-80Y Installationsanweisung - Englisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info