Bedienungsanleitung Jablotron TD-101 (Seite 3 von 12) (Englisch)

554896

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Telephone dialer TD-101 / TD-101W - 3 - MDJ512 10

Conformity:

Hereby, Jablotron Ltd., declares that this TD-101(W) is in compliance with the essential requirements

and other relevant provisions of Directive 1999/5/EC. Original of the conformity assessment can be

found at the web page www.jablotron.cz

, section Technical support.

Notes :

Although this product does not contain any harmful materials we suggest you to return the product to

the dealer or directly to the producer after usage.

1. Description

The TD-101 is an automatic dialing device that transmits prerecorded information via the telephone line.

The dialer can send two different 10 second voice messages (or one 20 second message) to four phone

numbers. It can also send two different Numeric messages to two different PAGERS and four digital codes

to a monitoring station. The desired type of communication is easily selected during installation.

The dialer has two trigger inputs. The optional model TD-101W can also be triggered remotely with a

wireless remote control.

There are three levels of operation for the TD-101: standby, user, and installer. Three light emitting

diodes on the front of the TD-101 show what level the dialer is in.

In standby mode the TD-101 waits for an input from either of the trigger inputs or from the built in keypad.

At the user level (accessible with User Code) you can enter and delete phone numbers, change the

voice messages, change the user code, or test that the TD-101 is functioning properly. Model TD-

101W can also "learn“ a remote control code in this level.

At the installer level (accessible with Installer Code) you can modify optional functions of the dialer

and enter data for digital communication with a monitoring station.

All data is stored in the TD-101's EEPROM memory. So disconnecting the power from the dialer will not

erase the data. An emergency reset feature can return the dialer to its original factory settings when

necessary.

The autodialer takes priority on your telephone line. When triggered, it will switch all other devices

(phone, fax, PABX) off line. By checking signals on the line (dial, busy or ringing tone) the dialer knows

what its next response should be. A built in speaker can be used as an audible monitor of the dialer

function. The telephone line is electrically separate from the power and trigger inputs. The TD-101 has

specially designed circuits to protect your telephone line from lightning strikes overvoltage. Tamper

protection is also provided.

1.1. Possibilities of use

The TD-101 dialer has a wide spectrum of use:

• property protection - connected with a house alarm system it can send not only an alarm

message, but also arm/disarm information or panic signal

• emergency calls - ill or old people can easily call a doctor or relatives for help using the TD-101.

The dialer can be triggered by pressing the

F key, or by an additional push button wired to the

input. Model TD-101W can also be triggered with a wireless remote control.

• technical information sending - the dialer can automatically report failures of crucial devices

(refrigerator, cooling systems, pumps, heating systems, elevators etc.) or in connection with a

suitable sensor it can inform about reaching of a critical level of controlled parameters

(temperature, humidity, water level etc.).

2. Specifications

operating voltage 12VDC (10-14V)

current consumption stand by 15 mA max.

operating 100 mA max.

trigger inputs IN1 & IN2 separated with optocouplers

option TD-101W also wireless

tamper switch 1A / 60V max.

telephone line electrically separated, over voltage protection

dialing method pulse / tone

phone number Memories voice message 4x 16 digits (Mem1-4)

pager 2x 26 digits (Mem5,6)

monitoring station 2x 16 digits (Mem7,8)

phone line signal detection dialing, busy or ringing tone

voice message duration 2x 10 or 1x 20sec.

monitoring station protocols ADEMCO, SILENT KNIGHT, SESCOA, FRANKLIN, DCI,

VERTEX, RADIONICS, DTMF 1400, DTMF 2300

can be connected to analogue interfaces TBR 21/1998, EG 201 121 V1.13/2000, AS/ACIF S002/2001

(Australia)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron TD-101 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info