Bedienungsanleitung Jablotron UC-6007 (Seite 2 von 2) (Englisch)

554920

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

UC-6007/6014 receiver 2/2 MJQ51102

Indicators on the front housing of the receiver indicate the status of the

output channels

LEDs 1 to 7(14) Meaning

Off Channel is not used (no transmitter is enrolled)

Steady Green Channel has a transmitter enrolled, relay is off

Steady Red Relay is on (activated by the enrolled transmitter)

Flashing Green Communication with the enrolled transmitter is down

(Low battery in transmitter, radio interference etc.)

Flashing Red Enrollment mode (to enroll a transmitter)

Flashing Red

(rapidly)

Output is overloaded or short-circuited.

Control channel MODE

The receiver has a special control channel MODE to which a control

panel type JA-6x (PgX output) or RC-4x remote controls can be enrolled.

This channel can be used for remotely controlling the mode in which the

outputs will work.

If no transmitter is enrolled to the MODE channel, then outputs 1-7(14)

react in a normal way to signals from their corresponding thermostats.

If the control panel is enrolled and the PgX output is activated (indicator

MODE lit red) outputs 1-7(14) react in a normal way to signals from their

corresponding thermostats.

If the PgX output is deactivated (indicator MODE lit green), then outputs

1-7(14) ignore signals from thermostats. They only react to anti-frost

signals from a thermostat supporting this feature (e.g. TP-31).

Indicator MODE

Off Channel is not used - no transmitter is enrolled

(

receiver reacts to standard signals from thermostats)

teady Green Transmitter is enrolled – channel MODE is

eactivated, outputs 1-7(14) only react to the anti-frost

ignals from thermostats

teady Red

ransmitter is enrolled – channel MODE is activated,

utputs 1-7(14) react to standard signals from

hermostats

lashing Green Communication with the enrolled transmitter is down

(

Low battery in transmitter, radio interference etc.)

Use and Maintenance

All enrolled transmitters (thermostats and detectors) transmit regular

check signals. If the receiver does not receive the signal of an enrolled

transmitter for a certain period, it will indicate that communication with this

item is down (flashing green LED) and the corresponding output will turn off

One reason for the lost connection can be low batteries in the transmitter.

The average lifetime of a transmitter's batteries is about 1 year. Each

transmitter checks its battery conditions and signals in advance if the

batteries are reaching a critically low state (see the transmitter manual for

details).

Another reason for possible connection failure can be radio signal

interference in the operational band of the receiver. In such a case the

receiver will usually indicate loss of communication with a multiple

number of transmitters. In this situation, check if there is any non-

approved or faulty radio-communicating device within the range of the

receiver.

Outputs which have not been activated for 7 days will switch on for

5 minutes to protect connected devices, especially pumps which can be

damaged if they are not used for a long time.

Warning: the manufacturer is not responsible for any damage caused

by improper installation or any non-suitable use of this product.

Specification

Power supply: 230 V AC, 50Hz, protection class II

Consumption: 0.02 A stand-by; 0.2 A max.

Max. relay output load: 10 A / 230V

Voltage of outputs 1-7(14) and COM: 24V DC

Max. load of outputs 1-7(14): max. 0.4 A per single output and 1.7A

total for all outputs

Radio frequency: 433.9 MHz

Working range with JA-60 100 m (open area)

Working range with RC 30 m (open area)

Dimensions: 258 x 214 x 77 mm

Radio characteristics: ETSI EN 300220

EMC: EN 50130-4, EN 55022

Safety: EN 60950

Working temperature: -10 to +40

Can be operated according to ERC REC 70-03

Jablotron Ltd. hereby declares that the UC-6007/6014 is in

compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC. The original of the conformity assessment can be

found on website www.jablotron.com

-Technical support section.

Note: Although this product does not contain any harmful

materials we suggest you return the product to the dealer or

directly to the producer after use.

Dimensions

Internet: www.jablotron.cz

Tel.: +420 483 559 999

fax: +420 483 559 993

Pod Skalkou 33

466 01 Jablonec nad Nisou

Czech Republic

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jablotron UC-6007 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info