Bedienungsanleitung Jamo 8A2 (Seite 2 von 9) (Englisch, Französisch)

616099

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

Congratulations on your purchase of

amo Indoor/Outdoor speakers.

ackage content.

Speaker (2) Port plug “i” (4) Allen wrench (1)

Assembled bracket (2) Thumb screw “j” (4) Manual (1)

Screw plug “g” (8) Covers “k” (4)

racket.

The brackets comes pre-assembled. If disassembling the bracket for paint-

ing, re-assemble it as follow: Place the curved bracket (a) between the wall

bracket (b) and wall bracket cover (c) as shown in fig. 1. Insert two 1” allen

bolts (d) through wall bracket into wall bracket cover and tighten with the

supplied allen wrench. Insert two ½” allen bolts (e) into each side of wall

bracket and tighten towards curved bracket.

ounting of bracket.

The bracket can be mounted for horizontal or vertical placement of the

speaker. Mount the bracket with four screws (not included) appropriate for

the surface the bracket is mounted to (wood, brick, concrete or other). Take

into account the weight of the speaker (specications on back). A hole (f) in

the middle of the bracket allows for running the speaker wire through the

bracket if so desired. Cover the screws with four screw plugs (g) fig. 2.

ounting of port plugs.

If the front of the speaker is exposed to rain directly entering the bass reex

ports (under the grill), the ports should be closed to avoid lling the

speaker with water. High moisture is not a problem. Remove the grill (h)

from the speaker and insert two port plugs (i) into the bass ports. Re-install

the grill. The speaker will reproduce less bass with the ports closed.

Fig. 1

Congratulations on your purchase of

Jamo Indoor/Outdoor speakers

Package content

Speaker (2) Port plug “i” (4) Allen wrench (1)

Assembled bracket (2) Thumb screw “j” (4) Manual (1)

Screw plug “g” (8) Covers “k” (4)

Bracket

The brackets comes pre-assembled. If disassembling the bracket for paint-ing, re-assemble it

as follow: Place the curved bracket (a) between the wall bracket (b) and wall bracket cover

and tighten with the supplied allen wrench. Insert two ½” allen bolts (e) into each side of wall

bracket and tighten towards curved bracket.

Mounting of bracket

The bracket can be mounted for horizontal or vertical placement of the speaker. Mount the

bracket with four screws (not included) appropriate for the surface the bracket is mounted to

(wood, brick, concrete or other). Take into account the weight of the speaker (specications on

back). A hole (f ) in the middle of the bracket allows for running the speaker wire through the

bracket if so desired. Cover the screws with four screw plugs (g) g. 2.

Mounting of port plugs

If the front of the speaker is exposed to rain directly entering the bass reex ports (under the

grill), the ports should be closed to avoid lling the speaker with water. High moisture is not a

problem. Remove the grill (h) from the speaker and insert two port plugs (i) into the bass ports.

Re-install the grill. The speaker will reproduce less bass with the ports closed.

Fig. 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Jamo 8A2 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info