769362
22
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
2222
12. TROUBLESHOOTING
Never try to repair the product yourself. If you have problems
using this product, check the following points before you request
services.
System
The unit will not turn on.
Check if the power cord is plugged into power and the
soundbar.
The soundbar has no response to button pressing.
Restore the soundbar to factory settings (See the “9.
RESTORE FACTORY SETTINGS” chapter).
Sound
No sound from soundbar
Make sure that the soundbar is not muted.
Select the correct audio input source on the remote control.
Connect the soundbar to your TV or other devices properly
Restore the soundbar to its factory settings by pressing and
holding and on the soundbar for more than 10 seconds.
Distorted sound or echo
If you play audio from your TV through the soundbar, make
sure that your TV is muted or the built-in TV speaker is
disabled.
Audio and video are not synchronized.
Enable the audio sync function to synchronize audio and
video (See “Audio sync” in the “8. SOUND SETTINGS”
chapter).
No height sound effects of Dolby Atmos
If your TV supports HDMI ARC only, make sure that you have
connected your digital device to the soundbar through the
HDMI IN connector on the soundbar (See “TV (HDMI ARC)”
under “5.1 Connection with your TV and digital devices” in
the “5. CONNECT” chapter)
Enjoy the sound effects of Dolby Atmos when you play
movies from the TV / HDMI source. For audio streaming over
Bluetooth or casting apps (enabled by Chromecast built-in,
AirPlay or Alexa), Dolby Atmos is not supported.
Bluetooth
A device cannot be connected with the soundbar.
Check if you have enabled Bluetooth on the device.
If the soundbar has been paired with another Bluetooth
device, reset Bluetooth (see “To connect to another device”
under “5.2 Bluetooth connection” in the “5. CONNECT”
chapter).
If your Bluetooth device has ever been paired with the
soundbar, reset Bluetooth on the soundbar, unpair the
soundbar on the Bluetooth device, and then, pair the
Bluetooth device with the soundbar again (see “To connect
to another device” under “5.2 Bluetooth connection” in the
“5. CONNECT” chapter).
Poor audio quality from a connected Bluetooth device
The Bluetooth reception is poor. Move the source device
closer to the soundbar, or remove any obstacle between the
source device and the soundbar.
The connected Bluetooth device connects and
disconnects constantly.
The Bluetooth reception is poor. Move the source device
closer to the soundbar, or remove any obstacle between the
source device and the soundbar.
Wi-Fi
Failed to connect to Wi-Fi.
Make sure that Wi-Fi is turned on.
Make sure that you have selected the right network and
entered the correct password.
Make sure that your router or modem is turned on and within
the range.
In your router settings, make sure that you have set the
security type to WPA2 or auto.
Make sure that your soundbar is connected to the same
wireless LAN as your smartphone or tablet.
If you have difculties in setting up Wi-Fi, reset Wi-Fi by
holding on the soundbar until “ ” is displayed.
On the soundbar that you have connected to Wi-Fi through
the AirPlay speaker setup on an iOS device, make sure that
you connect the soundbar to the same Wi-Fi network when
you set up Chromecast built-in through the Google Home
app, or Alexa through the Amazon Alexa app.
The Google Home app cannot nd the device.
Make sure that your soundbar is powered on.
Make sure that your network is working properly.
Make sure that your router or modem is powered on and
within the range.
The Amazon Alexa app cannot nd the device.
Follow the steps under “Manual: Guided setupand
“Barcode setup” in the “5.3.4 **Wi-Fi setup through the
Amazon Alexa app” chapter. You will allow Alexa to discover
the soundbar.
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JBL Bar 5.0 MultiBeam wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JBL Bar 5.0 MultiBeam

JBL Bar 5.0 MultiBeam Bedienungsanleitung - Deutsch - 26 seiten

JBL Bar 5.0 MultiBeam Bedienungsanleitung - Holländisch - 25 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info