TROUBLESHOOTING
29
If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set
as there is a risk of electric shock.
If you are unable to remedy the problem by following these hints, call service and support at the
phone number shown below.
Warning: Under no circumstances should you try to repair the set yourself, as this will invalidate the
warranty
Problem Cause Solution
No sound / power
Volume not adjusted Adjust the Volume
Connect the AC cord properly
Display does not function
properly / No reaction to
operation of any of the controls
Electrostatic discharge
Switch off and unplug the set.
Reconnect after a few seconds
The CD/DVD skips tracks
CD/DVD damaged or dirty Replace or clean CD/DVD
Program is active Quit program mode
No disc indication
No CD/DVD inserted Insert a CD/DVD, CD-R or CD-RW
CD/DVD badly scratched or dirty Replace or clean CD/DVD
Laser lens has steamed up Wait until lens has cleared
CD-R/DVD-R is blank or the disc is
not finalized
Use a finalized CD-R/DVD-R
CD/DVD Playback does not work
CD/DVD badly scratched or dirty Replace or clean CD/DVD
Laser lens steamed up
Wait until lens has adjusted to room
temperature
Power cord not securely connected
ENGLISH
