Bedienungsanleitung JL Audio MX10IB3 (Seite 3 von 4) (Englisch)

700505

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

The enclosure recommendations listed are external dimensions which assume the use of 3/4” (19mm) thick material. If you are using 5/8” (16mm) thick material, subtract 1/4”

(6.5mm) from each dimension. Do not use any material with a thickness of less than 5/8” (16mm) as this may compromise the rigidity of the enclosure.

All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal

volume. All enclosure dimensions listed have already taken this into account.

JL AUDIO MX10IB3 3

CAUTION

While this speaker is designed to be water and

spray resistant, it is not designed to be submerged

or to withstand high-pressure water spray.

Please exercise care when washing your boat to

avoid damaging your speaker. Do not install on

submersibles, personal watercraft or any other

vessel likely to be under water at any time.

Prolonged exposure to sound pressure levels in

excess of 100dB can cause permanent hearing

loss. This high-performance speaker can exceed

this level. Please exercise restraint in its operation

in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vessel, it is

extremely important to secure it firmly. This applies

not only to the woofer itself, but also the structure

it is mounted to. If not firmly attached, the speaker

can become a dangerous projectile in a collision.

Please review the mounting information carefully

and use the supplied marine-grade hardware to

mount this product.

All specifications are subject to change without notice.

Fiberglass Thickness Recommended Pilot Hole Drill Size

0.125 in. (3.18 mm) or less 7/64 in. (2.78 mm) pilot hole

foam core / fiberglass sandwich 7/64 in. (2.78 mm) pilot hole

larger than 0.125 in. (3.18 mm) 1/8 in. (3.18 mm) pilot hole

#8 SCREW: PILOT HOLE RECOMMENDATIONS

Subwoofer Recommended Sealed Design

Volume

(net int.)

External Dimensions

(Width x Height x Depth)

(Hz)

Qtc

MX10IB3

2.0ft

56.6 litres

18 in. x 18 in. x 14.5 in.

457 mm x 457 x 368 mm

42.9 53.66 0.967

Sealed Design

ENCLOSURE SPECIFICATIONS

NOTE: The MX10IB3 Marine Subwoofer is not

recommended for use in Ported Enclosures.

INTERCHANGEABLE LOGO BADGE

(Sport-Grille Models Only)

Interchangeable Logo Badges for Sport Grille

model subwoofers are included to further customize

your installation. The design of the Sport Grille allows

for the JL Audio logo to be added in your choice of

included colors and oriented in the manner that best

suits your installation.

NOTE: A left and a right badge of each color is

included. These two different orientations ensure

the “JL Audio” Logo will read correctly wherever

positioned (most commonly the 3:00 or 9:00

position).

Remove the adhesive backing from the badge

and affix the badge to the grille using the small

positioning hole as a guide. See diagram at right.

3:00 Position

9:00 Position

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JL Audio MX10IB3 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info