WIRING DIAGRAM:
WARNING!
It is absolutely vital that your component
system is connected as shown in the diagram on
the preceding page. Failure to connect the
system as shown will result in damage to your
speakers which is NOT covered under warranty.
Do not substitute different crossover networks
into your XR653-CS System. Only use crossover
networks clearly marked “XR653-CSxo”.
BUILT-IN TWEETER
PROTECTION CIRCUITRY:
The XR Crossover networks are equipped with
an advanced electronic tweeter protection circuit
designed to minimize the possibility of tweeter
failure. This electronic device monitors current going
to the tweeter and will disconnect the tweeter from
the signal when it senses overload. Should this occur
while listening to the audio system, simply reduce the
volume for a few seconds and the protection circuit
will reset itself automatically.
ADJUSTABLE TWEETER LEVEL:
The XR653-CSxo Crossover networks provide
four levels of tweeter level adjustability designed to
compensate for different mounting locations, vehicle
interiors and personal taste. These levels are
selectable via a switch located under the clear cover
of each crossover case. We recommend that you
begin listening at the “REF” (Reference) position. If
the sound seems too bright or aggressive,
experiment with either of the lower tweeter level
settings (-1.5 dB or - 3 dB). If the sound is too dull,
switch to the +1.5 dB setting. For quick A/B
comparison, it is safe to operate the switches while
the system is playing.
JL AUDIO XR653-CS 3
