474877
28
Zoom out
Zoom in
Vorherige Seite
1/29
Nächste Seite
Function value range
Functions Display Range Preset Range
Speed 0.0 - 99.9 km/h None
RPM 20 - 999 rpm None
Time 00.00 - 99.59 min 01.00 - 99.00 min
Distance 0.00 - 99.99 km 0.5 - 99.50 km
Watt 0 - 999 watts 0 - 350 watts
Calories 0 - 9999 cal 0 - 9999 cal
Pulse 30 - 240 bpm 30 - 240 bpm
Recovery F1 - F6 None
Training in MANUAL mode
Select “MANUAL”, use “UP”and“DOWN” button to
adjust the load level (this ergometer offers 16
levels), confirm selection by pressing “
ENTER
”.
“TIME” flashes: use “UP”and“DOWN” button to set
exercise time, confirm selection by pressing
ENTER
”. If you donot intend setting exercise
time, simply press “
ENTER”.
“DISTANCE” flashes: use “UP”and“DOWN” button
to set distance, confirm selection by pressing
ENTER”. If you donot intend setting exercise
distance, simply press “
ENTER
”.
“CALORIES” flashes: use “UP”and“DOWN” button
to set calorie consumption, confirm selection by
pressing “
ENTER
”. If you donot intend setting
calorie consumption, simply press “
ENTER”.
“WATT” flashes: use “UP”and“DOWN” button to
set target watts, confirm selection by pressing
ENTER”. The tension difficulty will be auto-
adjusted according to the Watt figure. If the figure
is under the target value, the tension difficulty will
be up-adjusted one level every 30 seconds, up to
the maximum level 16. As soon as you achieved
the set value, tension difficulty will be down
adjusted one level immediately. In case of
overspec the level will be down adjusted one level
immediately, and keep down-adjusting each 15
seconds until you reach the preset value. If you
donot intend setting Watts, simply press
ENTER”.
“PULSE” flashes: use “UP”and“DOWN” button to
set maximum heart rate, confirm selection by
pressing “MODE”. If you donot intend setting a
heart rate level, simply press “
ENTER
”, the
monitor will display current heart rate value.
Start exercising by pressing the “ST/STOP” button.
Training in PROGRAM mode
Select “PROGRAM”, use “UP”and“DOWN” button
to select profile 1 to 12, confirm selection by
pressing “
ENTER”.
Press “
ENTER” again, and set target value for
‘TIME, DISTANCE, CALORIES AND PULSE”.
Follow the procedure as described above in
manual mode. In program mode “WATT” cannot
be preset.
If you donot intend setting any target value, start
exercising by pressing the “ST/STOP” button.
Training in USER mode
Select “USER”, use “UP”and“DOWN” button to set
up your own profile (this ergometer offers 16 load
levels and 16 load segments).
In each segment confirm your loadsettings by
pressing “
ENTER”.
Start exercising directly by pressing the “ST/STOP”
button, or if you intend to set personal target
values, press the “ST/STOP” button once again.
“P” and “TIME” are flashing. Follow the procedure
as described above in manual mode for presetting
target values.
Start exercising by pressing the “ST/STOP” button.
Training in TARGET H.R. mode
Select “TARGET H.R.”, use “UP”and“DOWN”
button to enter your age.
Press
ENTER”, “55%” is flashing. Use“UP”and
“DOWN” button to select 55, 75, 90 or THR.
Confirm your selection by pressing “MODE”.
If you selected 55, 75 or 90%, “TIME” is flashing:
follow the procedure as described above in manual
mode for presetting target values.
If you selected THR, “100” is flashing: use “UP”and
“DOWN” button to set target heart rate.
Confirm your selection by pressing “
ENTER”.
Start exercising by pressing the “ST/STOP” button.
Upon entering rate in Bpm (Beats per minute) the
load tension will be controlled by current heart rate.
The resistance will be auto-adjusted according to
current heart rate figure. If your heart rate figure is
under the target pulse, the tension will be up-
adjusted one level every 30 seconds, up to the
maximum level 16. As soon as your heart rate
figure has achieved the target pulse, tension will
be down adjusted one level immediately. In case of
overspec the level will be down adjusted one level
immediately, and keep down-adjusting each 15
seconds until your heart rate figure has achieved
the target pulse.
To reselect initial mode push “STOP” (LCD shows
“P” in top left). Press “RESET” and use “UP”and
“DOWN” button to select another program mode.
The display will shut down automatically after 4
minutes of non-activity.
Training Instructions
If you have not been physically active for a
long period of time and also to avoid health
risks you should consult your general
physician before starting to exercise.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Joy Sport HT-Excellent wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info