28350
68
Zoom out
Zoom in
Vorherige Seite
1/404
Nächste Seite
2-8
2
Radar interference reflector function selection
Turns on and off the radar interference reflector (IR). The IR is turned on or off each time this
switch is clicked.
Radar reception scale (GAIN)
This indicates the degree the knob has been turned.
Sea clutter suppression function (SEA) selection
Selects either manual or automatic sea clutter suppression. The bar on the right indicates the
position in the manual mode.
Sea scale
This indicates the amount the knob has been turned in manual mode. When in auto
mode,“AUTO”will be displayed.
Rain/snow clutter suppression function (RAIN) selection
Selects either manual or automatic rain/snow clutter suppression. The bar on the right
indicates the position in the manual mode.
Rain scale
This indicates the amount the knob has been turned in manual mode. When in auto mode,
“AUTO”will be displayed.
Own ship’s trail indication interval function (TRACK) selection
Turns on and off the own ship’s trail indication interval.
Radar trail indicator function (TRAILS) selection
Sets the time intervals for radar trails. OFF, 0.5MIN, 1MIN, 3MIN, or 6MIN can be selected.
Image processing function (PROC) selection
Sets the image processing mode. OFF, PROC1, PROC2 or PROC3 can be selected.
Radar trail mode selection
Sets true trail or relative trail when operating the radar trail function.
“T” is displayed when true trails are used and “R” is displayed for relative trails.
This setting is also limited by the radar bearing mode.
When the North-up (N UP) mode is used, switching between “T” and “R” is possible.
When the Course-up (C UP) mode is used, only “T” is set.
When the Head-up (H UP) mode is used, only “R” is set.
Radar image enhance (ENH) function selection
Turns on and off the radar image enhance function. It is turned on or off each time this switch is
clicked.
Cursor mode selection
Sets the cursor mode. Clicking this button will display a pull-down menu. After setting the
mode, the cursor can be moved and the left trackball button used to make various settings.
Because all the modes are to be used during radar transmission, a mode may not operate
properly if it is selected in the standby state.
Off center mode selection
This has the same function as the [OFF CENT] switch. Shifts the own ship position within the
screen (within 60% of the scope’s radius) to display a wider range in an arbitrary direction.
When this button is pressed when the system is already in the off center mode, then the off
center function will be turned off.
21
22
23
24
25
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JRC JMA9933SA wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info