28356
65
Zoom out
Zoom in
Vorherige Seite
1/148
Nächste Seite
64
Section 3 Operation
TRAILS
OFF
0.5MIN
1 MIN
3 MIN
6 MIN
CONTINUOUS
EXPANDER
OFF ON
PROCESS
OFF
PROCESS1
PROCESS2
PROCESS3
•Select the “EXPANDER” in RADAR SETTING menu and push the
Joystick
, the “EXPANDER” pull-down menu is displayed. Change
settings to ON/OFF by
Joystick
right or left and push
Joystick
.
PROCESS
This feature allows the operator to detect a weak signal target or to
detect a target in the sea clutter.
Selecting “OFF” is no video processing. “PROCESS1” is used to
detect a weak echo. “PROCESS2” and “PROCESS3” are used to scan
correlation mode for use to detect a target in the sea clutter.
“PROCESS3” is more effective than “PROCESS2” but response is
slow.
•Select “PROCESS” in RADAR SETTING menu and push the
Joystick
to display the “PROCESS” pull-down menu. Select setting
by
Joystick
up or down and push
Joystick
.
Note:
•When PROCESS2 or PROCESS3 is used, an object moving with a high
speed is displayed dimly.
“PROCESS” is a very useful feature in the North stabilized or
Course stabilized heading mode.
Note:
•Notice that when “PROCESS” is used, a target that is moving with a
relatively higher velocity than that of your own ship may provide weaker
echoes than actual ones in the display or may provide no echoes of the
target itself.
TRAILS
This feature allows the operator to see the past history of target
movement or behind the moving targets. Selecting “OFF” is no trails.
The numerical selections, 0.5, 1, 3, and 6, represent the length of the
trail time” in minutes. For example, if 3 minutes is selected as the
interval, the trail presents the last 3 minutes of the target movement.
This provides a visual indication of a targets relative speed and course.
“CONTINUOUS” provides a continuous trail.
If range scale or bearing mode is changed, or offset display position
by the offset function, or changed display mode “RADAR” full to
“RADAR/CHART”, the trails will be cleared and new trails will be
redrawn to the screen.
The trails are drawn for anything that move on screen, including
sea gulls, sea clutter, buoys, lobsterpots, and shoreline. In general, it is
better to use the trails feature away from harbor and the shoreline to
avoid a cluttered display and to concentrate on trails of target vessels.
If own vessel changes the course all trails are influenced in HUP
mode, it is better to use the trail feature in NUP mode or CUP mode.
•Select the “TRAILS” in RADAR SETTING menu and push the
Joystick
, the “TRAILS” pull-down menu is displayed. Select settings
by
Joystick
up or down and push
Joystick
.
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JRC Radar1800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info