28358
31
Zoom out
Zoom in
Vorherige Seite
1/55
Nächste Seite
24
4.10 SETTING OFFCENT
By pressing the OFFCENT key, the display is into off-center mode by 2/3 ra-
dius, expanding the display area in the direction instructed by JOYSTICK. Press
the key a second time to return the display to normal.
OPERATION
Off-center mode off Off-center mode on
4.11 RANGE MEASUREMENT
(1) Consider the range scale in use and count the number of rings between the
center of the screen and the target. Add to this a visually estimate of the
distance between the inner edge of the target and the nearest ring.
(2) Using #1 VRM
Press the EBL/VRM key.
If EBL is highlighted, press and hold the EBL/VRM key to change to VRM
mode.
Rotate the J-DIAL clockwise for outer direction or counterclockwise for
inner direction to move the variable range marker. The actual target distance
appears on the center top of the screen in selecting unit.
To turn off the VRM, press the EBL/VRM key while VRM is highlighted.
(3) Using #2 VRM
Press the JOYSTICK.
Selects FUNCTION menu, then press the JOYSTICK.
Selects #2 VRM-SET, then press the JOYSTICK. The VRM2 appears
highlight on the upper right corner of the display.
24
4.10 SETTING OFFCENT
By pressing the OFFCENT key, the display is into off-center mode by 2/3 ra-
dius, expanding the display area in the direction instructed by JOYSTICK. Press
the key a second time to return the display to normal.
OPERATION
Off-center mode off Off-center mode on
4.11 RANGE MEASUREMENT
(1) Consider the range scale in use and count the number of rings between the
center of the screen and the target. Add to this a visually estimate of the
distance between the inner edge of the target and the nearest ring.
(2) Using #1 VRM
Press the EBL/VRM key.
If EBL is highlighted, press and hold the EBL/VRM key to change to VRM
mode.
Rotate the J-DIAL clockwise for outer direction or counterclockwise for
inner direction to move the variable range marker. The actual target distance
appears on the center top of the screen in selecting unit.
To turn off the VRM, press the EBL/VRM key while VRM is highlighted.
(3) Using #2 VRM
Press the JOYSTICK.
Selects FUNCTION menu, then press the JOYSTICK.
Selects #2 VRM-SET, then press the JOYSTICK. The VRM2 appears
highlight on the upper right corner of the display.
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JRC Radar3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info