28358
33
Zoom out
Zoom in
Vorherige Seite
1/55
Nächste Seite
26 OPERATION
Selects #2 EBL-SET, then press the JOYSTICK. The EBL2 appears high-
light on the upper right corner of the display.
Rotate the J-DIAL clockwise or counterclockwise to move the #2 EBL
on the center of the target. The actual target bearing appears on the cen-
ter top of the screen in selecting unit.
To turn off the #2 EBL, selects the FUNCTION-#2 EBL-OFF on the
menu sheet.
4.13 SETTING GUARD
The GUARD Zone may be zone completely surrounding the vessel or a partial
trapezoidal zone to monitor targets entering or departing the specified area.
The guard zone will sound audible and visual alerts to the operator. In the IN
mode, an alarm will sound if a target enters the area. The IN alarm is effective
for alerting the operator to targets approaching his vessel. In the OUT mode,
the alarm will sound if a target leaves the prescribed area. This type of alarm is
useful for monitoring as an anchor watch, or pair trawling.
Press the GUARD key.
Sets the cross mark to the start point using the JOYSTICK and press the
JOYSTICK.
To determine the Guard Zone width, set the cross cursor using the JOY-
STICK and press the JOYSTICK.
To determine the bearing limits of the Guard Zone, set the cross cursor
using the JOYSTICK and press the JOYSTICK. We now have a sector zone
which alarm if any target enters the zone with the guard zone alarm indica-
tor “GUARD I 4” which indicates IN alarm mode is in operation and the
alarm target sensitivity is set at 4.
Press the GUARD key again and the symbol will change to “GUARD O 4”
indicating that the OUT alarm will sound for targets leaving the guard zone.
Pressing the GUARD key again will turn off the Guard Zone.
To memorize an alarm zone, press and hold the GUARD key until the dis-
play beeps and the alarm character “GUARD I” turn into highlight at IN
mode alarm. At this time the zone will have been memorized for use at any
time.
26 OPERATION
Selects #2 EBL-SET, then press the JOYSTICK. The EBL2 appears high-
light on the upper right corner of the display.
Rotate the J-DIAL clockwise or counterclockwise to move the #2 EBL
on the center of the target. The actual target bearing appears on the cen-
ter top of the screen in selecting unit.
To turn off the #2 EBL, selects the FUNCTION-#2 EBL-OFF on the
menu sheet.
4.13 SETTING GUARD
The GUARD Zone may be zone completely surrounding the vessel or a partial
trapezoidal zone to monitor targets entering or departing the specified area.
The guard zone will sound audible and visual alerts to the operator. In the IN
mode, an alarm will sound if a target enters the area. The IN alarm is effective
for alerting the operator to targets approaching his vessel. In the OUT mode,
the alarm will sound if a target leaves the prescribed area. This type of alarm is
useful for monitoring as an anchor watch, or pair trawling.
Press the GUARD key.
Sets the cross mark to the start point using the JOYSTICK and press the
JOYSTICK.
To determine the Guard Zone width, set the cross cursor using the JOY-
STICK and press the JOYSTICK.
To determine the bearing limits of the Guard Zone, set the cross cursor
using the JOYSTICK and press the JOYSTICK. We now have a sector zone
which alarm if any target enters the zone with the guard zone alarm indica-
tor “GUARD I 4” which indicates IN alarm mode is in operation and the
alarm target sensitivity is set at 4.
Press the GUARD key again and the symbol will change to “GUARD O 4”
indicating that the OUT alarm will sound for targets leaving the guard zone.
Pressing the GUARD key again will turn off the Guard Zone.
To memorize an alarm zone, press and hold the GUARD key until the dis-
play beeps and the alarm character “GUARD I” turn into highlight at IN
mode alarm. At this time the zone will have been memorized for use at any
time.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JRC Radar3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info