ATTENTION!
Disconnect the electrical cable.
On the rear of the stove there is a fuse holding compartment which is located underneath the supply socket. With a
screwdriver open the cover of the fuse holding compartment, and replace the fuse if necessary (3.15 AT delayed type).
Figure 18 Plug the unit back in and press the main switch. If the problem persists or occurs again, contact your MCZ
retailer.
5.3.
CHECK OF INTERNAL COMPONENTS
ATTENTION!
The check of the internal electromechanical components must be carried out only by qualified personnel with
technical knowledge of electricity and combustion. If necessary, contact authorized HANKS retailers.
We recommend that an annual maintenance service is carried out, preferably under a programmed service contract.
The essential part of this service is a visual and functional check on the following components:
Reduction motor
Smoke expulsion fan
Smoke sensor
Heat-exchanger fan
Ignition sparkplug
Resettable pellet thermostat
Room temperature sensor
Motherboard / service card
Fuses protecting panel - motherboard - services card
Wiring
The following is a summary of the checks and/or maintenance tasks which are indispensable for the correct operation of
the stove.
