149489
6
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
PREPARATION
4 Press the
button to start the AUTO
PROGRAM function.
The AUTO PROGRAM menu appears and received TV
channels are automatically registered in the Programme
numbers (PR).
To cancel the AUTO PROGRAM function:
Press the
button.
5 After the TV channels have been regis-
tered in the Programme numbers (PR),
the EDIT menu appears.
You can proceed to edit the Programme numbers (PR)
using the EDIT/MANUAL function. For details, see “ED-
IT/MANUAL” on page 26.
When not using the EDIT/MANUAL function:
If you do not need to use the EDIT/MANUAL function,
go to the next step.
6 Press the
button to display the T-V
LINK menu.
7 Operate the T-V LINK menu according
to the type of a VCR connected to the
EXT-2 terminal.
When a T-V LINK compatible VCR is not con-
nected:
Press the
button to exit the T-V LINK menu.
The T-V LINK menu disappears.
When a T-V LINK compatible VCR is connected:
Follow the operating procedure “Downloading the data
to VCR” on page 30 to transmit the Programme number
(PR) data.
8 Now, the initial settings are complete,
and you can watch the TV.
Note:
BBC1, BBC2, ITV, CHANNEL4 and CHANNEL 5 are
automatically set to the Programme numbers PR 1 to
PR 5. SKY 1 is set to the Programme number PR 6,
but no TV channel name (ID) be set. If the TV doesn’t
receive one of these TV channels, that Programme
number (PR) will not be set.
To receive SKY 1 a satelite tuner is needed. You
must have the satelite tuner set to SKY 1 before
starting the AUTO PROGRAM function.
If a TV channel you want to view is not set to a Pro-
gramme number (PR), manually set it using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 26.
The TV channel is not registered in Programme
number PR 0 (AV). When you want to register a TV
channel to PR 0 (AV), manually set it using the MAN-
UAL function. For details, see “EDIT/MANUAL” on
page 26.
In some areas TV reception is possible from more
than one transmitter, e.g. different ITV regions. In
this case each TV channel may be set twice. If this
happens the first set of channels will have the
stronger signal. If you want to delete the second set
of channels, you will have to do it manually, see
page 28.
If you have had any problems setting up
your new TV, please call the Helpline at
0181-208-7654
Enjoy your new TV!
WFT1EK_E1.fm Page 6 Wednesday, February 16, 2000 6:27 PM
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC av 32wft 1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info