660751
6
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
66
Index of Parts and Functions (cont.)
The illustration of the
monitor is of DT-V21G2.
Front panel
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
• Youcanselectthecolorofthetallylampfrom“Green”or“Red.”
You can also select whether the whole lamp is turned on at once, or whether it is turned on one half at a
time. (+ “Tally Setting” in “Function Setting” on page 15 and “External Control” on page 20)
• “NoEffect”isdisplayedwhenyoupressabuttonwhichisnotavailableforthecurrentinputorsignalformat(thelamplightsevenwhen
the function does not actually work).
• YoucannotusethebuttonsfortheitemscontrolledbytheMAKEsystem(“RemoteOn”appears,andthelampdoesnotlightup).
1 Speakers (stereo)
The speakers emit the same audio signal emitted from the AUDIO
ASSIGN (MONITOR OUT) terminals.
(+ 5 “AUDIO ASSIGN (MONITOR OUT) terminals (pin jack)” on
page 5)
2 VOLUME adjustment knob
Adjusts the volume.
3 Picture adjustment knob
PHASE: Adjusts the picture hue
CHROMA: Adjusts the picture color density
BRIGHT: Adjusts the picture brightness
CONTRAST: Adjusts the picture contrast
l PHASE and CHROMA cannot be adjusted for certain signal
formats.
l When “Component Phase” is set to “Disable” and an NTSC
signal is input, PHASE can be adjusted (+ page 15).
4 MUTING button
Turns off the sound (Muting).
l To cancel the function, press the button again or turn the
VOLUME adjustment knob.
l Muting function is also canceled when “Balance” of “Audio
Setting” in the Main Menu is changed (+ page 13).
l Muting function cannot be activated when a menu screen is
displayed.
5 FUNCTION button
Assign functions to the F1 and F2 buttons when the menu is not
displayed. (+ page 16)
6 EMBEDDED AUDIO setting button
Selects an audio channel when EMBEDDED AUDIO signals are
contained in SDI input. (+ “Audio Channel Selection” on page
8)
DT-V24G2 DT-V17G25
1 - e, i and ; are common to
DT-V24G2, DT-V21G2, DT-V17G2 and
DT-V17G25.
The illustration of the monitor is of
DT-V21G2.
DT-V24G2_EN.indb 6 2016/07/27 16:37:08
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC DT-V24G2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC DT-V24G2

JVC DT-V24G2 Bedienungsanleitung - Deutsch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info