Bedienungsanleitung JVC fs x1 (Seite 59 von 65) (Englisch)

158880

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

Using the Timers

English

On the Remote Control

Press the CLOCK/TIMER button repeat-

edly until “ON (time)” appears on the

display.

At this time, “DAILY” indicator blinks on the display.

Each time you press the button, the display changes as

follows.

DAILY ON?/DAILY OFF? = ON (time)* = Clock

setting display = Cancelled = (back to the beginning)

*: Select this item!

The System enters ON-time setting mode, and the cur-

rent ON time appears on the display and the hour digits

blink.

Setting the ON time (Example: AM 10:15)

1. Press the 3 or 2 button to set the hour you want the

System to come on, then press the SET button.

The minute digits of the ON time blink on the display.

Pressing the 3 button moves the time forwards and

pressing the 2 button moves it backwards.

Holding down the button moves the time.

2. Press the 3 or 2 button to set the minute, then press

the SET button.

The System enters OFF-time setting mode, and the

hour digits blink.

Setting the OFF time (Example: PM 1:30).

Note that the same time as the ON time cannot be set.

1. Press the 3 or 2 button to set the hour you want the

System to be turned off, then press the SET button.

The minute digits of the OFF time blink on the dis-

play.

2. Press the 3 or 2 button to set the minute, then press

the SET button.

The System enter the Music Source Selecting mode

and “FM?” appears on the display.

Selecting the music source.

Press the 3 or 2 button to select the music source you

want to listen to, then press the SET button.

Each time you press the 3 or 2 button, the display

changes as shown below:

FM?

AM?

CD?

LINE?*

MELODY?

(back to the beginning)

*: If the name has been changed, that name (e.g.

“TAPE”) will appear. (See page 19.)

According to the music source you have selected, the

next operation differs.

Preparation for each music source:

Perform the following operation according to the music

source you have selected. Then, the System enters Vol-

ume Setting mode.

● When selecting “FM?” or “AM?”

Press the 3 or 2 button to select the preset station

number, then press the SET button.

• If you select the display “- -”, the current broad-

cast station is selected.

● When selecting “CD?”

Press the 3 or 2 button to select the track number

you want to start playback, then press the SET button.

• If you select the display “- -”, playback will start

from the first track.

● When selecting “LINE?”

Prepare the external equipment so that it will turn on

at the ON time set by the System.

To allow this, the equipment should have the timer

function.

● When selecting “MELODY?”

Press the 3 or 2 button to select one of melodies

(MELODY 1-10). Then, the selected melody is

played back.

FM? : Tunes in to the specified preset FM sta-

tion.

AM? : Tunes in to the specified preset AM sta-

tion.

CD? : Plays the specified track on the speci-

fied CD.

LINE? : Plays an external source.

MELODY? : Select one of 10 melodies.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC fs x1 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info