532502

JVC GY-HM150U Seite 101

101
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
97
Ⅵ The following phenomena are not malfunctions.
●
The screen momentarily turns red or black when the sun
enters the field of view.
●
Black dots, or shiny red, blue, or green spots appear on the
screen.
The LCD screen contains 99.99 % or more effective
pixels, but 0.01 % or fewer pixels may be inactive or
always lit.
Ⅵ Reset the camera recorder when it does not
function properly.
1
Turn off the power.
2 Remove the battery and AC adapter from the camera
recorder, reattach them, and turn on the power.
3 Perform [Reset All] in the [Others] menu. (A Page 74)
Symptom Action
No display on the TV monitor.
●
Set [Display On TV] in the [A/V Out] menu to
A
On
B
. (
A
Page 73)
Playback does not start after selecting a clip
thumbnail and pressing the center of the set
lever.
●
Is the selected clip a playable clip? Playback is not possible if the clip has a different video
format setting.
The actual recording time is shorter than the
estimated time.
●
Recording time may shorten depending on the environment, such as when shooting fast-
moving subjects.
The [AUDIO LEVEL CH-1/CH-2] adjustment knob
does not work.
●
Is the [CH1/CH2 AUDIO SELECT] switch set to
A
AUTO
B
?
SDHC/SDXC card cannot be initialized
(formatted).
●
Is the write-protect switch of the SDHC/SDXC card turned on? Make sure that the write-
protect switch is turned off. (
A
Page 21)
Battery alarm appears even after loading a
charged battery.
●
Replace the battery with a new one.
Focus ring of the lens does not work.
●
Set the [FOCUS/ZOOM] ring switch to
A
FOCUS
B
. (
A
Page 29)
Zoom ring of the lens does not work.
●
Set the [FOCUS/ZOOM] ring switch to
A
ZOOM
B
. (
A
Page 28)
The built-in microphone does not work.
●
Remove the audio unit cable from the [AUDIO IN] terminal of the camera recorder.
(
A
Page 38)
Unable to adjust the recording level of the built-in
microphone using the recording level knob.
●
The recording level of the built-in microphone cannot be adjusted using the recording level
knob.
The recording level knob can only be used for the [INPUT1/INPUT2] terminal. Set the
volume of the built-in microphone using [Internal Mic Level] in the [Audio Set] menu.
(
A
Page 65)
The time code and user’s bit are not displayed.
●
Even in Camera mode or Media mode, the time code and user’s bit may not be displayed
depending to the type of status display. (
A
Page 80)
●
Is [TC/UB] of [Status Display] in the [LCD/VF] menu set to
A
Off
B
? To display the time code
and user’s bit, set it to a value other than
A
Off
B
. (
A
Page 72)
The date and time are not displayed.
●
The date and time are only displayed on the STATUS 2 and STATUS 3 screens in the
Camera mode (during shooting).
●
To display the time on the STATUS 1 screen, set [Time Display] of [Status Display] in the
[LCD/VF] menu to a value other than
A
Off
B
. (
A
Page 83, 84 )
Unable to switch from the Camera mode to Media
mode.
●
You cannot switch to the Media mode during recording (mode indicator is red) or recording
pause (yellow displays such as [STBY
C
] and [STBY
F
]). To switch to the Media mode,
cancel recording pause and set to the stop mode (white display).
Sound or video is interrupted.
●
Sometimes playback is interrupted at the connecting section between two scenes.
A part of the TV monitor screen appears shaky.
●
Set [HDMI Output] in the [A/V Out] menu to
A
Auto
B
. (
A
Page 73)
Images look unnatural on the TV monitor screen.
(long and thin, etc.)
●
Adjust [Video Output] in the [A/V Out] menu to match your TV monitor. (
A
Page 73)
Recorded clips cannot be found on the thumbnail
screen.
●
Check the video file format or video format.
●
Adjust [System Definition], [File Format], [Camera Resolution], and [Frame & Bit Rate] in
the [Record Format] menu to match the video format to be played back. (
A
Page 48, 63 )
The camera recorder heats up.
●
The camera recorder may become warm when used for a long time. This is not a
malfunction.
The camera recorder operates slowly when
turning the power on or off.
●
If there are many videos files on the SDHC/SDXC card, it takes time for the camera
recorder to process the files. Copy the files on the SDHC/SDXC card to a PC, and delete
them from the SDHC/SDXC card.
The remote control does not work.
●
Replace the battery. (
A
Page 15)
●
The remote control may not function outdoors or under strong light conditions.
●
Set [Wireless Remote] in the [Others] menu to
A
On
B
. (
A
Page 74)
●
Disconnect the wired remote control if it is connected.
GY-HM150U.book Page 97 Monday, September 5, 2011 1:48 AM
… 101 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC GY-HM150U wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info