57101
35
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
(No.YA092B)1-35
5.1.6 DETAILS
Self-check is performed for the following items.
Check item Display Description of detection
Diagnosis
signal (line)
Means of detection
Low bias line short
protection
LOB Low bias line (9V / 5V) short protector
activated.
Confirm the operation of the low bais
protection circuit.
[Q2802 /Q2801] (REGULATOR PWB)
Protector Detection starts 3 seconds upon power
on Turns off power if NG is detected
within 400ms.
Fan lock (stop) FAN Confirmation of operating stop of heat
cooling fan.
[IC8005 : 1 / 2 / 4 / 5-pin]
(FAN CONTROL PWB)
Protector Detection starts 3 seconds upon power
on Turns off power if NG is detected
within 250ms.
AC timer clock TIM Not used ---
---
Presence of sync signal
SYNC Confirmation of presence of video sync
signal.
M : Main sync signal
S : Sub sync signal
HD : Component sync signal
[IC201] (ANALOG SIGNAL PWB)
SDA Confirmation of presence of video sync
signal.
MAIN CPU
communication
MSM Confirmation of ACK (response) signal
which used sync communications with
Chassis CPU.
[IC7601] (DIGITAL SIGNAL PWB)
WAKE If it checks whenever sync
communication with SHM performed and
no reply of ACK signal an error will be
counted.
Digital tuner DIGI Not used --- ---
Memory for chassis CPU
MEM Confirmation of reply of ACK signal which
used I
2
C communication.
[IC7602] (DIGITAL SIGNAL PWB)
SDA
If checks whenever I
2
C communication
is performed and no reply of ACK signal
an error will be counted.
AV switch AVSW Same as above
[IC501] (ANALOG SIGNAL PWB)
SDA Same as above
3D YC separation
YC Same as above
[IC1001] (DIGITAL SIGNAL PWB)
Audio process
AIO Same as above
[IC1140] (RECEIVER PWB)
RF tuner TUN Same as above
[TU1101] (RECEIVER PWB)
Ghost reduction GCR Not used ---
---
DIST process IP Confirmation of reply of ACK signal which
used I
2
C communication.
[IC3001] (DIGITAL SIGNAL PWB)
SDA If checks whenever I
2
C communication
is performed and no reply of ACK signal
an error will be counted.
RGB process RGB Same as above
[IC4001] ((DIGITAL SIGNAL PWB)
DVI transmission DVI Not used --- ---
Digital input receive HDMI Confirmation of reply of ACK signal which
used I
2
C communication.
[IC8001] (DIGITAL SIGNAL PWB)
SDA If checks whenever I
2
communication is
performed and no reply of ACK signal
an error will be counted.
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC HD-52Z575 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info