Bedienungsanleitung JVC LT-26DY8 (Seite 35 von 39) (Englisch)

57149

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

English - 34 -

Via The Scart

This LCD TV has 2 SCART sockets. If you want

to connect peripherals (e.g. video, decoder,

etc.) which have SCART sockets to the TV, use

EXT 1 or EXT 2.

If an external device is connected via the SCART

sockets, the TV will be switched to AV mode

automatically.

Via Aerial Input

If you want to connect to your TV, peripherals

like video recorders or decoders, but the de-

vice you want to connect does not have a

SCART socket, you should connect it to the

AERIAL INPUT of the TV.

If the VCR is connected via Aerial input it is

suggested to use Programme 0.

Decoder

Cable TV offers you a wide choice of prog-

rammes. Most of them are free, others are to

be paid for by the viewer. This means that you

will need to subscribe to the broadcasting

organisation whose programmes you wish

to receive. This organisation will supply you a

corresponding decoder unit to allow the prog-

rammes to be unscrambled.

For further information ask your dealer. See

also the booklet supplied with your decoder.

Connect a decoder with an aerial socket

to the TV

 Connect the aerial cable.

Connect a decoder without an aerial

socket to the TV

 Connect the decoder to the TV with a SCART

cable to the SCART socket.

TV and Video Recorder

 Connect the aerial cables.

Better picture quality can be obtained if you also

connect a Scart cable to SCART sockets.

Playback NTSC

To use this option you can;

 Connect an NTSC VCR player to a SCART

socket at the rear side of the TV.

 Connect an NTSC VCR player to RCA Jacks

at the side of the TV.

Then, press AV button to select appropriate

source.

Copy Facility

Source selection for VCR recording.

 Select Feature menu.

 Select Ext-2 Out by pressing 

 /   but-

ton.

 Select a source to copy the picture from that

source.

Search for and Store the Test

Signal of the Video Recorder

 Unplug the aerial cable from the aerial socket

of your video recorder.

 Switch on your TV and put the video recorder

on the test signal. (See the booklet for your

video recorder.)

 Enter the Install menu and select search.

 Search for the test signal of your video re-

corder in the same way as you searched for

and stored the TV signals. Store the test sig-

nal under programme number 0.

 Replace the aerial cable in the aerial socket

of your video recorder once you have stored

the test signal.

Camera and Camcorder

To Connect to AV Input

Connect your camera or camcorder to AV

(EXT-4) input at the right side of the TV.

 Connect your equipment to the TV via VIDEO

(yellow), AUDIO R (red) and AUDIO L (white)

inputs. You must connect the jacks to the

input using the same colour.

Connect the Decoder to the Video

Recorder

Some video recorders have a special SCART

socket for decoder.

 Connect a SCART cable to the SCART socket

of your decoder and to the special SCART

socket of your video recorder. Refer to the

booklet of your video recorder.

A01-ENG-JVC (LT-26DY8ZG)-26815W-RMC1899S MB22 PANEU IDTV-(WO PIP)-(10052179)-5011xxxx.p6511.09.2007, 13:5034

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC LT-26DY8 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von JVC LT-26DY8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info