56505
39
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
36
Tuner operations
When the stereo FM program currently tuned in is noisy,
you can change the FM reception mode to improve the
reception.
7While listening to an FM station
Press FM MODE.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode
changes.
AUTO:
When a program is broadcast in stereo, you will hear
stereo sound. (The ST indicator lights on the display
window.) When in monaural, you will hear monaural
sound. This mode is also useful to suppress static noise
between stations.
MONO:
Reception will be improved although you will lose the
stereo effect. (The MONO indicator lights up on the
display window.) In this mode, you will hear noise until
you are tuned in to a station.
The Radio Data System allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well
as information about what type of program they broadcast,
such as sports or music, etc.
With the system, you can receive the following types of
Radio Data System signals:
PS (Program Service): Shows commonly known station
names.
PTY (Program Type): Shows the types of programs
broadcast.
RT (Radio Text): Shows text messages the station sends.
Enhanced Other Network: See page 38.
NOTE
The Radio Data System is not available for AM (MW)
broadcasts.
The Radio Data System may not operate correctly if the
station tuned in is not transmitting
Radio Data System
signals properly or if the signal strength is weak.
7 To show the Radio Data System signals information
Press DISPLAY while holding SHIFT,
while listening to an FM station.
Each time you repeat the procedure, the indication on the
display window changes.
PS (Program Service):
While searching, “PS” appears and then the station
names will be displayed. “NO PS” appears if no signal is
sent.
PTY (Program Type):
While searching, “PTY” appears and then the type of the
broadcast program will be displayed. “NO PTY” appears
if no signal is sent.
RT (Radio Text):
While searching, “RT” appears and then text messages
the station sends will be displayed. “NO RT” appears if no
signal is sent.
Frequency:
Station frequency (non-Radio Data System service).
About characters shown in the display window
When PS, PTY, or RT signals appear in the display window,
some special characters and marks may not be displayed
correctly.
NOTE
If searching finishes immediately, “PS”, “PTY”, and “RT” will
not appear on the display window.
Searching for a program by PTY code
One of the advantages of the Radio Data System service is
that you can locate a particular kind of program from the
preset channels (see page 35) by specifying the PTY code.
7 To search for a program using the PTY code
NOTE
Before you start operation:
Press FM/AM on the remote control to select an FM
station.
The PTY Search is only applicable to preset stations.
To stop searching any time during the process, press PTY
SEARCH while searching.
There is a time limit for doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
Selecting the FM reception
mode
Using the Radio Data System
when receiving FM stations
See page 35 for button locations.
EN_TH-U1[B]-03body.fm Page 36 Wednesday, July 25, 2007 4:06 PM
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für JVC TH-U1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von JVC TH-U1

JVC TH-U1 Bedienungsanleitung - Deutsch - 86 seiten

JVC TH-U1 Bedienungsanleitung - Holländisch - 86 seiten

JVC TH-U1 Bedienungsanleitung - Französisch - 86 seiten

JVC TH-U1 Bedienungsanleitung - Italienisch - 86 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info