Bedienungsanleitung JVC UX-DM8 (Seite 42 von 48) (Englisch)

56523

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Editing operations (see pages 28 to 33)

• Do not vibrate the System while recording/editing tracks.

Take care especially while

“WRITING” is shown on the

display. It may damage the recorded tracks in the System.

Giving (Editing) Titles to Tracks or Groups:

• When a track is recorded, the track title is given to the track

automatically. When you give a title to the track, delete

that title first, then enter your desired title.

Erasing a Group (ERASE GR):

• When deleting a group including unplayable track from the

USB device, only the playable tracks are deleted, and the

unplayable tracks remains (the group cannot be erased).

• When deleting a group including more than 999 tracks on

the USB device, only the tracks recognized by the System

are deleted (the group cannot be erased).

Timer Operations (see pages 34 and 36)

• When you unplug the AC power cord or if a power failure

occurs, the timer will be canceled. You need to set the

clock first, then the timer again.

Setting Recording Timer:

• The volume is set to

“VOLUME 0” while recording. When

you want to hear a sound while recording, adjust the

volume manually.

Setting Playback Timer:

• If you do not specify the preset station or track number

correctly while setting a timer, the currently selected station

or the first track will be played with the timer activated.

• When Playback Timer works, the volume increases

gradually to the volume you have set.

Timer Priority:

• If you set the Sleep Timer after Recording or Playback

Timer starts, Recording or Playback Timer is canceled.

Maintenance

To get the best performance of the System, keep your discs

and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge

while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when

placing it back in its case.

• Avoid exposure to direct sunlight, extreme temperature,

and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center

to edge.

Cleaning the System

• Stains should be wiped off with a soft cloth. If the System

is heavily stained, wipe it with a cloth soaked in water-

diluted neutral detergent and wrung well, then wipe clean

with a dry cloth.

• Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the

following:

– DO NOT wipe it with a hard cloth.

– DO NOT wipe it forcefully.

– DO NOT wipe it with thinner or benzine.

– DO NOT apply any volatile substance such as

insecticides to it.

– DO NOT allow any rubber or plastic to remain in contact

for a long time.

To remove the speaker grilles:

Holes

Speaker

grille

Projection

UX-DM8[U].book Page 39 Monday, June 4, 2007 8:20 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

JVC UX-DM8 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info