Bedienungsanleitung Kalorik ac 9 (Seite 6 von 13) (Englisch)

134089

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Generated by Unregistered Batch DOC TO PDF Converter 2011.3.804.1511, please register!

OPERATION

Auto, cooling, heating, dehumidifying and ventilation mode

 Under auto operation, the microcomputer will produce the ideal environment according to the

actual room temperature (auto settled temperature is 25°C).

 Under cooling operation, if the set temperature is higher than the room temperature, the air

conditioner will stop cooling.

 Under heating operation, if the set temperature is lower than the room temperature, the air

conditioner will stop heating.

 Under dehumidification mode, by the temperature of the room it runs discontinuously with lower fan

speed.

Operation:

1. Press the "ON/OFF" button to switch on the air conditioner.

2. Press the "mode" button to choose the desired operation mode.

3. Press the "temp set" button to set the temperature (under auto operation, the temperature will

increase or decrease relative to the auto settled temperature).

4. Press the "swing" button to choose the airflow direction.

5. Press the "fan speed" button to set the fan speed.

Sleep

Under cooling operation, the temperature will increase by 1,5°C. Then the air conditioner will work on

the set temperature.

Under heating operation, the temperature will drop 1°C after the sleep function has run for 2 hours, then

the temperature will drop another 0,5°C. Then the air conditioner will work at the set temperature.

Operation:

1. Press the "ON/OFF" button to switch on the appliance.

2. Press the "mode" button to choose "cooling" or "heating".

3. Press the "temp set" button to set the temperature.

4. Press the "swing" button to choose the airflow direction.

5. Press the "fan speed" button to set the fan speed.

6. Press the "sleep" button to turn on the sleep function. Press it again to turn off the sleep function.

NOTES: remote control LCD display no variety

Time

1. Just insert the batteries or press down the "TIME" button several seconds, then " " is blinking on

the LCD.

2. Press the "TIME" button to adjust time. Each time you press the "TIME" button, time will increase

by 1 minute or 1 hour.

3. Press down the "TIMER" button for several seconds, " " will stop blinking, time setting is ok.

Timer

Press the "TIMER" button, the display on LCD will be cyclically as follows: "ON TIMER"  "OFF

TIMER" "NO TIMER"  "ON TIMER".

1. ON TIMER

Press the "TIMER" button, "ON TIMER" is blinking.

Press the "TIME" button to adjust the "ON TIME".

Each time you press the "TIME" button, time increases by 10 minutes; press the "TIME" button down for

several seconds, time increases by 10 minutes or 1 hour.

Release the "TIME" button, "ON TIMER" will stop blinking after 4 seconds. The "ON TIMER" setting is

ok.

2. OFF TIMER

Press the "TIMER" button, "OFF TIMER" is blinking.

Next step is the same as "ON TIMER" setting.

3. CANCEL TIMER

Press the "TIMER" button till "ON TIMER" or "OFF TIMER" disappears, then cancel the timer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kalorik ac 9 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kalorik ac 9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info