652814
18
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
18 | EN
To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to
the AUX input socket of BT 4220.
Switch the external device (e.g. MP3 player) on.
Start playback of the external device.
Remember to switch off the unit when you are nished using the external device.
Note:
The AUX In has a xed volume. To adjust the volume when playing via AUX In, use the volume
setting on your external device.
Troubleshooting
If there should be any problem with this product, please try to solve it with the help of the following
information before contacting service. Most problems can be solved easily.
• BT4220 cannot be powered on
Make sure that the AC cord is properly connected to the unit and that the power outlet is turned on.
Ensure that the Power ON/OFF switch is set to “On”. When the speaker is powered on, the LED
status indicator will light up.
• There is no Bluetooth
®
link between BT4220 and the external device
Ensure that your Bluetooth
®
enabled device supports the A2DP proe. Refer to its user manual on
how to turn on the Bluetooth
®
functions and capabilities.
You may also try the following:
Delete the BT 4220 name entry from your Bluetooth
®
device paired memory list and perform
the steps from “Bluetooth
®
Connection” to re-pair your device with BT 4220.
Ensure that both BT 4220 and your Bluetooth
®
device are not connected to any other
devices.
On some Bluetooth
®
devices you may need to select BT 4220 as your default output device
after pairing is completed.
Press and hold the CONNECT button of BT 4220 for 8 seconds to reset the unit.
• Bluetooth
®
link is established and paired between the devices but there is no music
Make sure that the volume of the speaker and the external device is not set to zero (muted).
With some built-in Bluetooth
®
enabled computers, 3rd party USB Bluetooth
®
dongles or other
devices, you may be required to manually specify/set-up the audio output as BT 4220. Please refer
to the documentation of the external device for further information.
Specications
Power Adaptor: Input: AC 100-240V ~ 50/60Hz
Output: DC 5V 1,0A
Power Supply for the Unit: DC 5V 1,0A
Output Power: 6W
Dimensions (WxDxH) ca.: 280 x 100 x 110 mm
Technical specications and design may change without notice.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Karcher Audio BT4220 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info