Bedienungsanleitung Karcher Audio GEEN040 (Seite 25 von 28) (Deutsch, Englisch)

733565

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EN | 25

2. Using the DN/F-R or UP/F-F buttons, select the track to be played rst in the sequence.

3. Press the PRESET button again. “P02” will be ashing in the display.

4. Repeat the steps 2 - 3 to select up to 20 tracks (or 99 tracks) for your sequence.

5. Press the PLAY/PAUSE button to start the playback of your sequence.

6. Fast Forward, Fast Rewind, Skipping Tracks and Repeat Modes can be used as described

before.

7. To stop playback, press the STOP button. To delete your sequence press this button a second

time.

USB Playback

1. Turn the unit on as described above and select USB mode by pressing the FUNCTION button.

2. Insert a USB stick into the USB socket of the unit.

3. The content will be read and playback will start automatically. If no USB is inserted, “NO” will be

shown in the display.

4. Adjust the volume by turning the VOLUME knob to the desired sound level.

5. To temporarily stop the playback (pause), press the PLAY/PAUSE button once. Press the button

again to resume playback.

6. To stop playback, press the STOP button.

Playback modes

Skipping, fast forwarding and fast rewinding tracks, repeat modes and random function in USB mode

are the same as for CD playback.

Notes:

• A USB device must always be connected directly to the USB port of this product. The use of a

USB extension cord is not supported by this product. The USB port of this product cannot com-

municate with a computer directly.

• The reading time for a USB drive varies depending on the speed of the memory device and the

number of songs and folders. In some cases the reading time may be as long as 60 seconds.

• Always switch off the unit before removing a USB ash drive to prevent damage to your USB

device. The manufacturer is not responsible for the loss or damage of data.

• Due to numerous methods of compression it could be that some les or USB ash drives cannot

be played.

Record Player

1. Turn the unit on as described above and select AUX/PHONO mode by pressing the FUNCTION

button (the display will show “AUX” in large and “PHONO” in the top right corner).

2. Make sure you have removed the stylus cover from the stylus.

3. Place a record on the center spindle.

4. Set the turntable speed selector to the appropriate speed (33, 45 or 78 RPM). If you are playing

45 RPM singles, place the 45 RPM adapter on the center spindle.

5. Release the tone arm lock.

6. Using the cue lever raise the tone arm off its rest and gently move the tonearm towards the

record. The turntable will start turning.

7. Carefully move the tone arm over the record and lower it at the desired spot using the cue lever.

8. Adjust the volume by turning the VOLUME knob to the desired sound level.

9. When the turntable nishes playing, the tone arm will return to its rest automatically!

10. If you want to stop playback before the record reaches its end, carefully lift up the tone arm using

the cue lever and gently move the tone arm above its rest. Lower the tone arm using the cue

lever.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio GEEN040 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info