733545
18
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
18 - EN
The signal strength is shown in the bottom line of the display:
The further to the right the bar is reaching, the better is the signal strength.
The empty bar indicates the minimum signal strength necessary for an optimal reception.
Alarm Function
This unit enables you to set 2 different and independent alarm times. You can even set an alarm
to ring Daily, Weekdays, Weekends, or Once.
1. To set an alarm, press the ALARM button once to set Alarm1, or twice to set Alarm2.
2. OFF will be ashing. Press the ◄ LEFT or ► RIGHT button to select ON and then press
SELECT to conrm.
3. The hour will be ashing. Press the ◄ LEFT or ► RIGHT button to set the hour of the
alarm time and then press SELECT to conrm.
4. The minute will be ashing. Press the ◄ LEFT or ► RIGHT button to set the minute of
the alarm time and then press SELECT to conrm.
5. The Alarm Mode will be ashing. Press the ◄ LEFT or ► RIGHT button to select be-
tween Once, Daily, Weekdays, or Weekends and then press SELECT to conrm.
6. The Alarm Type will be ashing. Press the ◄ LEFT or ► RIGHT button to select between
BEEPER1, BEEPER2, DAB, or FM and then press SELECT to conrm.
7. The Alarm Volume will be ashing. Press the ◄ LEFT or ► RIGHT button to select the
desired alarm volume and then press SELECT to conrm.
8. The alarm setting is now complete and the unit will return to the last mode.
Deactivating an Alarm
1. To deactivate an alarm, press the ALARM button once or twice to go to the Alarm1 or
Alarm2 setting.
2. While ON is ashing, press the ◄ LEFT or ► RIGHT button to select OFF and then
press SELECT to conrm.
3. The alarm is now deactivated.
Stopping an Alarm
To stop an active alarm, press the POWER button. The unit will return to standby mode.
Snooze
1. When your alarm is ringing, you can press the SELECT button to temporarily suspend
the alarm. “Z” will be shown in the display. The alarm will ring again 6 minutes later (the
Snooze interval time is 6 minutes).
2. Snooze will be repeated until the POWER button is pressed.
Notes:
For the alarm to work properly, a time signal must have been received from a DAB sta-
tion.
The alarm only works with the unit in standby mode. If the unit is switched off completely,
the alarm will not sound.
If DAB is selected for Alarm Type but no station is being received, the alarm will not
sound.
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Karcher Audio JB2410 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info