Bedienungsanleitung Karcher Audio RA2050 (Seite 24 von 28) (Deutsch, Englisch)

733573

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

24 | EN

• To cancel or change the countdown timer, briey press the Timer button to show the remain-

ing time and press the button once again. You can now change the time using the and

buttons. Set “0” to cancel the timer.

Sleep Timer

The sleep function enables you to set a timer after which the unit will turn itself into standby mode

automatically.

• While in any playback mode, press the Sleep button on the unit or remote control repeatedly to

set the desired time.

• You can select between 90, 60, 30 or 15 minutes. “zZ” will be shown in the display.

• To check how much time is left on the set timer, press the Sleep button once.

• To cancel the sleep function, press the Sleep button repeatedly until “OFF” appears in the dis-

play. The “zZ” symbol will disappear from the display.

Radio

1. Switch the unit on as described previously.

2. Select the radio mode by pressing the Source button repeatedly in case the unit is not already in

radio mode. The frequency will be shown in the display.

3. Select a desired radio station by pressing the or button repeatedly.

4. To automatically search for the next available radio station, press and hold for 2 seconds the

or button.

Note: For a better reception completely unroll the FM wire antenna.

Manually Store Radio Stations

This unit enables you to store up to 20 radio stations:

1. Tune to a radio station which you would like to store.

2. Press the Prog button. The presets will start ashing (e.g. “P 01”).

3. Select a desired preset place from P 01 - P 20 on which you want to store the current frequency

by pressing the - Album/Preset + buttons.

4. Press the Prog button again to conrm your setting.

5. Repeat steps 1 - 4 to store up to 20 frequencies.

6. To recall a stored frequency, press the - Album/Preset + buttons until you reach the desired

preset.

Automatically Store Radio Stations

Rather than manually storing stations, you can also let the unit automatically store found stations:

1. While in radio mode press and hold for 2 seconds the Prog button.

2. “AUTO” will be shown in the display and the unit will consecutively store found stations (up to 20

stations).

Once nished, the unit will play the station which was rst available.

3. To recall a stored frequency, press the - Album/Preset + buttons until you reach the desired

preset.

RDS (Radio Data System)

This product is equipped with an RDS decoder. RDS allows text information to be transmitted by a ra-

dio station together with the audio broadcast. This text information can include name of the radio sta-

tion, name of the current program or song, news headlines, etc. and may vary from station to station.

When you have tuned into a radio station that is broadcasting RDS information, the RDS symbol

will be shown in the display.

This unit supports the following RDS modes which may be selected by repeatedly pressing the Disp

button:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RA2050 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info