Bedienungsanleitung Karcher Audio RR5025 (Seite 17 von 20) (Deutsch, Englisch)

733541

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

EN | 17

Note: For a better reception extend the FM wire antenna fully.

Manually Store Radio Stations

This unit enables you to store up to 30 radio stations:

1. Tune to a radio station which you would like to store.

2. Press the MEM/P-MODE button. The display will show “P01” and “PROGRAM” will be ashing.

3. Select a desired preset from P01 - P30 on which you want to store the current frequency by

pressing the M-/M+ buttons.

4. Press the MEM/P-MODE button again to conrm your setting.

5. Repeat steps 1 - 4 to store up to 30 frequencies.

6. To recall a stored frequency, press the M-/M+ buttons until you reach the desired preset.

Automatically Store Radio Stations

Rather than manually storing stations, you can also let the unit automatically store found stations:

1. While in radio mode press and hold for 2 seconds the Play/Pause button.

2. The unit will consecutively store found stations (up to 30 stations).

Once nished, the unit will play the station which was rst available.

3. To recall a stored frequency, press the M-/M+ buttons until you reach the desired preset.

CD Player

Playing Discs

1. Switch the unit on and select the CD mode by pressing the /FUNC. button repeatedly.

2. Open the CD door carefully and insert a disc with the printed side facing up. Close the CD door

again carefully.

3. The disc is being read and the total number of tracks will then be shown in the display.

4. Playback starts automatically with the rst track.

5. To temporarily stop the playback (pause), press the Play/Pause button once. The display will

be ashing. Press the button again to resume playback.

6. To stop playback, press the ■ Stop button.

Fast Forward / Fast Rewind & Skipping Tracks

• To jump to the previous track, press the Skip/Search Backward button once.

• To skip to the next track, press the Skip/Search Forward button once.

• To fast forward the currently playing track, press and hold the Skip/Search Forward button.

Once you reach the desired section of the track, release the button to resume normal playback.

• To fast rewind the currently playing track, press and hold the Skip/Search Backward button.

Once you reach the desired section of the track, release the button to resume normal playback.

Repeat Modes & Random Playback

At any time during playback,

• press the MEM/P-MODE button once to repeat the current track. “REPEAT” will be ashing.

• press the MEM/P-MODE button a second time to repeat all tracks. “REPEAT” will be lit steadily.

• press the MEM/P-MODE button a third time to play all tracks in random order. “RAN” will be

shown in the display.

• press the MEM/P-MODE button a fourth time to deactivate the repeat or random function.

Programming Track Order

You can store up to 20 tracks in a desired sequence.

1. While in CD stop mode, press the MEM/P-MODE button. “PROGRAM” will be ashing and “P01”

shown in the display.

2. Using the Skip/Search Backward / Skip/Search Forward buttons, select the track to be

played rst in the sequence.

3. Press the MEM/P-MODE button again. “P02” will be shown in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher Audio RR5025 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info